Help with wiring Shark controller with Sherline lathe motors

Post Reply
dreiii
Posts: 11
Joined: Tue Aug 21, 2012 5:57 pm
Model of CNC Machine: Shark-Sherline-Diode Laser-Ender3-K40
Location: Frogmore, Louisiana

Help with wiring Shark controller with Sherline lathe motors

Post by dreiii »

Could anyone point me in the right direction to finding info on wiring a Sherline lathe to the Shark controller. Have had the Sherline for several years and have had several problems with it. Sent back to factory once and that really didn't solve the problem. Now have Shark and found a way to do lathe work with VcarvePro. Hope this is possible, seems simple at first but then it gets complicated for a person with no real training or experience with CNC electronics.

Thanks in advance

Dan

User avatar
martin54
Vectric Wizard
Posts: 4778
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber System 48 (modified)
Location: Crossgates, Scotland

Re: Help with wiring Shark controller with Sherline lathe motors

Post by martin54 »

As well as asking on here might be an idea to register yourself on the shark forum & ask the question on there as well. Don't have or use a shark machine myself but have read posts on this forum from shark owners who say it is very helpful.

dreiii
Posts: 11
Joined: Tue Aug 21, 2012 5:57 pm
Model of CNC Machine: Shark-Sherline-Diode Laser-Ender3-K40
Location: Frogmore, Louisiana

Re: Help with wiring Shark controller with Sherline lathe motors

Post by dreiii »

Did that at same time as here. Thanks.

Post Reply