I'm not really sure if this is the right venue to ask for this kind of help but I'll ask and maybe someone can redirect me. I am working on some 3D - 2½D relief artwork for a local church. I am particularly interested in a person praying bass relief for one panel but am open to anything relevant to work with. I have run across some STL files for 3D printing that have some promise but those can be a bugger prepare. I would appreciate any help finding a source for good models.
Thanks, Ed
Help with resources
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Help with resources
Design and Make has a few choices: ->Link
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Craftsman
- Posts: 232
- Joined: Wed Jul 05, 2017 9:13 pm
- Model of CNC Machine: 24 X 36 3 Axis
- Location: Ipswich, South Dakota
Re: Help with resources
Thanks, I had forgotten that D&M had a few religious models. There are two that I may be able to use. One factor that seems to be a stumbling block is the aspect ratio of the panels I have to work with being rather narrow for the height.
Again, thanks.
Ed
Again, thanks.
Ed