Dear Board.............
Can anybody refer me to a service that is able to convert the attached .crv file to a .dxf
or if anyone familiar to a software that can do so? Thanks
Jerry
.crv to .dxf
.crv to .dxf
- Attachments
-
- Vectors Horse 26june20.crv
- (102.5 KiB) Downloaded 468 times
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: .crv to .dxf
Simply select all vectors(G roup if you want),then under File tab....Export as any format listed.
Likewise, use the Import, to bring it into a new project.
scottI've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: .crv to .dxf
No problem:)
You should have seen how much help I needed when I first started!
You should have seen how much help I needed when I first started!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
Re: .crv to .dxf
Thanks again.
Second question please?
Are you familiar with a laser cutting service that can cut this out of 16 gauge steel?
Jerry
Second question please?
Are you familiar with a laser cutting service that can cut this out of 16 gauge steel?
Jerry
Re: .crv to .dxf
There are a number of companies that will laser cut your .dxf files. A couple are oshcuts, sendcutssend or protolabs are just a few.
Their prices in many cases are cheaper than some of the local vendors. (At least for me.)
Google is your friend.
Steve
Their prices in many cases are cheaper than some of the local vendors. (At least for me.)
Google is your friend.
Steve
Re: .crv to .dxf
Perfect.......thanks again