Page 1 of 1

Clamping method

Posted: Thu Feb 07, 2019 3:28 pm
by Phil
I had to cut mortises in a pair of legs for a headboard. I trued up a 2 x 2 x 24 on my jointer and bolted it to my T-Track. I was able to clamp the leg to the 2 x 2 so that the clamps were not in the way of the router.


Re: Clamping method

Posted: Fri Feb 08, 2019 12:11 am
by highpockets
Very cleaver Phil !!!