Draw a vector from the desired tangent point on the circle through the center of the circle. Then rotate that line 90 degrees around the end that is on the circle to make the tangent.
To draw a tangent to a circle from a point: Use the circle tool. Click on the point and drag the circle so it passes through the center of the original circle. ( Optional: Trim the constructed circle to the original circle.) Draw the tangent vector from the point to the intersection of the two circles.
Be sure the Edit, Snap Options, Snap Guides to Geometry box is checked.
Quick tricks to draw a tangent to a circle.
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Quick tricks to draw a tangent to a circle.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Quick tricks to draw a tangent to a circle.
Hi Mike,
Maybe a screenshot or two will help us understand this tip a little better. I generally use the Circle Tangent Gadget for this type of thing for generating tangents between two circles, but your tip sounds intriguing!
Maybe a screenshot or two will help us understand this tip a little better. I generally use the Circle Tangent Gadget for this type of thing for generating tangents between two circles, but your tip sounds intriguing!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 38
- Joined: Sun Mar 21, 2010 5:14 pm
Re: Quick tricks to draw a tangent to a circle.
Mike, I think that is a wrong description of the method. The link below shows the correct method.
https://www.mathsisfun.com/geometry/con ... ngent.html
Basically, to draw a line tangent to a circle from a point, draw a line from the point to the center of the circle.
Bisect that line and from that midpoint draw a circle that goes through the center of the original circle. Where the circles intersect are the tangent points.
https://www.mathsisfun.com/geometry/con ... ngent.html
Basically, to draw a line tangent to a circle from a point, draw a line from the point to the center of the circle.
Bisect that line and from that midpoint draw a circle that goes through the center of the original circle. Where the circles intersect are the tangent points.
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Quick tricks to draw a tangent to a circle.
Mea Culpa. Sawmillsam, you are absolutely right.
sawmillsam wrote:Mike, I think that is a wrong description of the method. The link below shows the correct method.
https://www.mathsisfun.com/geometry/con ... ngent.html
Basically, to draw a line tangent to a circle from a point, draw a line from the point to the center of the circle.
Bisect that line and from that midpoint draw a circle that goes through the center of the original circle. Where the circles intersect are the tangent points.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Quick tricks to draw a tangent to a circle.
snap a line start point at the center of the circle
draw the line outwards at the desired angle
then offset the line outwards at the radius of the circle
use the scissor tool and clip the lines
The line will then be tangent to the curve of the circle
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale