Here's one that I did a few months ago. It's a sign, and yes, I did use some of James Booth's new ideas on it (I showed it to him so I think he's OK with it).
I used my vcarve offset tool to do some good stuff, and near the end I did some things that I've never seen anyone else do.
I hope you like it.
https://www.youtube.com/watch?v=-l28mM1NeFw
My nice little House Sign
-
- Vectric Apprentice
- Posts: 86
- Joined: Tue Jul 29, 2014 9:25 pm
- Model of CNC Machine: WinCNC Hybrid
- Location: Buckhannon, WV, USA
- Contact:
My nice little House Sign
Mike Queen
Microsystems World CNC (WinCNC)
https://www.youtube.com/user/cncMike304
Microsystems World CNC (WinCNC)
https://www.youtube.com/user/cncMike304
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: My nice little House Sign
Hi Mike,
I just want to thank you for taking the time to make your tutorial videos. Very helpful and fun to watch you work. You are greatly appreciated!
I just want to thank you for taking the time to make your tutorial videos. Very helpful and fun to watch you work. You are greatly appreciated!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: My nice little House Sign
I learned a lot from your video. Very helpful.
A small point: The sound level was a bit low, it was difficult to hear.
A small point: The sound level was a bit low, it was difficult to hear.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
-
- Vectric Apprentice
- Posts: 86
- Joined: Tue Jul 29, 2014 9:25 pm
- Model of CNC Machine: WinCNC Hybrid
- Location: Buckhannon, WV, USA
- Contact:
Re: My nice little House Sign
[
Thanks. That means a lot coming from you.
I also wanted to tell you I enjoyed working with you at CAMaster. I wish I could have had more time to sit in on your class but I had to do a little more training with the techs in the shop. I know I would have learned a lot.
I really enjoy your monthly projects. Thanks for those.
Hi Michael,mtylerfl wrote:Hi Mike,
I just want to thank you for taking the time to make your tutorial videos. Very helpful and fun to watch you work. You are greatly appreciated!
Thanks. That means a lot coming from you.
I also wanted to tell you I enjoyed working with you at CAMaster. I wish I could have had more time to sit in on your class but I had to do a little more training with the techs in the shop. I know I would have learned a lot.
I really enjoy your monthly projects. Thanks for those.
Mike Queen
Microsystems World CNC (WinCNC)
https://www.youtube.com/user/cncMike304
Microsystems World CNC (WinCNC)
https://www.youtube.com/user/cncMike304
-
- Vectric Apprentice
- Posts: 86
- Joined: Tue Jul 29, 2014 9:25 pm
- Model of CNC Machine: WinCNC Hybrid
- Location: Buckhannon, WV, USA
- Contact:
Re: My nice little House Sign
Thanks Mike. I'm happy it was informative. I'll try to work on my sound level next time.FixitMike wrote:I learned a lot from your video. Very helpful.
A small point: The sound level was a bit low, it was difficult to hear.
Mike Queen
Microsystems World CNC (WinCNC)
https://www.youtube.com/user/cncMike304
Microsystems World CNC (WinCNC)
https://www.youtube.com/user/cncMike304