I bought a supply of Scotch-Brite Radial Bristle Disc based on what others here on the forum had recommended. They were great for small production (quantities of 100) projects that I was working on that had inner pockets and things. And they worked quickly.
But they do wear down, and now they seem a lot more expensive; $1.58 for each on Amazon in a 24 pack of 120 grit.
https://www.amazon.com/Scotch-Brite-Rad ... B000W4RV4C
I'm wondering if there is something better now.
Scotch-Brite Radial Bristle Disc
- Tex_Lawrence
- Vectric Wizard
- Posts: 1080
- Joined: Fri Mar 25, 2016 11:30 am
- Model of CNC Machine: Shapeoko3XXL; JTech7W; V-CarvePro 12.013
- Location: Dayton, Texas (Don't Mess With My Texas!)
Scotch-Brite Radial Bristle Disc
Tex — Crooked Wood Products
Now there's a man with an open mind – you can feel the breeze from here.
Now there's a man with an open mind – you can feel the breeze from here.
-
- Vectric Wizard
- Posts: 776
- Joined: Sun Jun 16, 2013 4:40 am
- Model of CNC Machine: Home Built 4-axis Router
- Location: Fort Collins, CO
Re: Scotch-Brite Radial Bristle Disc
https://www.amazon.com/Radial-Bristle-A ... B07JVMZJFV
Less than a dime each. Maybe also less durable?
Less than a dime each. Maybe also less durable?
Dovetail and Finger Joint, Puzzle, Maze and Guilloche freeware at fabrikisto.com/tailmaker-software
- scotttarnor
- Vectric Wizard
- Posts: 1002
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: Scotch-Brite Radial Bristle Disc
I have been happy with their life, I had to look back in my Amazon orders it was 2020 last time I ordered any, I ordered the 25 pack it was $28 then, it’s up to $37.84 now.
Scott T
@scottscnc
@scottscnc
- Aussie
- Vectric Wizard
- Posts: 600
- Joined: Fri Nov 30, 2018 1:44 am
- Model of CNC Machine: Robotics Model 8
- Location: Adelaide Australia
- Contact:
Re: Scotch-Brite Radial Bristle Disc
Do you find the color of the disc can discolor the timber?
Thanks
Ron
Thanks
Ron
Ron
Crafers Crafts
Crafers Crafts
- scotttarnor
- Vectric Wizard
- Posts: 1002
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: Scotch-Brite Radial Bristle Disc
No issues here with the yellow (80 grit?) or white(120 grit?) 3M ones that I used.
Scott T
@scottscnc
@scottscnc