1940 Cadillac rose wood interior
-
- Posts: 35
- Joined: Sat Apr 20, 2013 4:31 am
- Model of CNC Machine: Shopbot 5 by 10 ATC
- Location: Selah, Wa
- Contact:
1940 Cadillac rose wood interior
Thought I would share a few before and after photo's of a 1940 Cadillac I was commissioned to do for a client.
Rose wood and polished aluminum. Designed and cut using aspire.
Hope you all enjoy!
Rose wood and polished aluminum. Designed and cut using aspire.
Hope you all enjoy!
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: 1940 Cadillac rose wood interior
Very nice.... Impressive work.
-
- Vectric Craftsman
- Posts: 103
- Joined: Fri Feb 07, 2020 4:07 am
- Model of CNC Machine: Axiom AR8 PRO V5
Re: 1940 Cadillac rose wood interior
Wow thats nice
-
- Vectric Craftsman
- Posts: 109
- Joined: Tue Jan 24, 2012 8:42 am
- Model of CNC Machine: Axiom AR8 Pro V5+Jetch Laser+Rotary
Re: 1940 Cadillac rose wood interior
That's really pretty. Nice work!
- Tex_Lawrence
- Vectric Wizard
- Posts: 965
- Joined: Fri Mar 25, 2016 11:30 am
- Model of CNC Machine: Shapeoko3XXL; JTech7W; V-CarvePro 12.004
- Location: Dayton, Texas (Don't Mess With My Texas!)
Re: 1940 Cadillac rose wood interior
And here I was thinking that I had to worry about warping, shrinkage and fit. How do you even sleep?
I sure wish I was there to run my fingers over that wood or just touch it. +1
I sure wish I was there to run my fingers over that wood or just touch it. +1
Tex — Crooked Wood Products
Now there's a man with an open mind – you can feel the breeze from here.
Now there's a man with an open mind – you can feel the breeze from here.
Re: 1940 Cadillac rose wood interior
Very nice upgrade.
Gary
Gary
- FabLab Wageningen
- Vectric Craftsman
- Posts: 214
- Joined: Mon May 09, 2022 8:17 pm
- Model of CNC Machine: Ooznest Workbee 1500x1500
- Location: Wageningen, Netherlands
- Contact:
Re: 1940 Cadillac rose wood interior
That is SO good it almost hurts.
What is the box on the right side of the trunk ?
Marcel.
What is the box on the right side of the trunk ?
Marcel.
Re: 1940 Cadillac rose wood interior
Very well done.
Phil
Phil
-
- Posts: 35
- Joined: Sat Apr 20, 2013 4:31 am
- Model of CNC Machine: Shopbot 5 by 10 ATC
- Location: Selah, Wa
- Contact:
Re: 1940 Cadillac rose wood interior
FabLab Wageningen wrote: ↑Thu Dec 01, 2022 2:16 pmThat is SO good it almost hurts.
What is the box on the right side of the trunk ?
Marcel.
The box is the fuel tank. There were quite a few modifications done to the car. The fuel fill door on the side of the car had the trunk release. Added power windows and power seats.
-
- Vectric Wizard
- Posts: 411
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: 1940 Cadillac rose wood interior
That is amazing…beautiful….stunning and a whole lot of other superlatives. Just WOW,
Nicely done!
Nicely done!
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- scotttarnor
- Vectric Wizard
- Posts: 945
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: 1940 Cadillac rose wood interior
This is amazing! I cannot imagine how much measuring and designing you must have done to complete this!
Scott T
@scottscnc
@scottscnc
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: 1940 Cadillac rose wood interior
Thanks for sharing, that is outstanding workmanship.
You make it sound easy when you say Designed & cut in Aspire
No mention of the huge amount of work that must have gone into planning, preparation, installing & finishing
I know people who would say that these people have more money than sense, my answer to that is always the same, No these people have sufficient money to have EXACTLY what they want
You make it sound easy when you say Designed & cut in Aspire
No mention of the huge amount of work that must have gone into planning, preparation, installing & finishing
I know people who would say that these people have more money than sense, my answer to that is always the same, No these people have sufficient money to have EXACTLY what they want
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 1940 Cadillac rose wood interior
Simply Elegant!!!
You must get Exceptional referrals for your Craftsmanship by word of mouth!
You must get Exceptional referrals for your Craftsmanship by word of mouth!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA