Sheriff badge wall art

This is the place to post images of work produced using Aspire
Post Reply
Beltramidave
Vectric Wizard
Posts: 525
Joined: Thu May 14, 2015 12:23 am
Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
Location: Bemidji, MN
Contact:

Sheriff badge wall art

Post by Beltramidave »

First real attempt using cherry wood. Finished piece is 36" tall/1.75" thick, finish is natural (lacquer). Was extremely nervous knowing my supply of cherry was limited, so this was a one shot deal. 9-1/2 hour carve, used a 1/16" tapered ballnose on center medallion.

This will hang in the county administrative office bldg.

Looking forward to seeing everyone in San Diego!!
Attachments
Finished1.jpg
Finished2.jpg
Unfinished1.jpg
Unfinished2.jpg
Dave
https://lakesedgewoodcraft.com/

User avatar
FixitMike
Vectric Wizard
Posts: 2173
Joined: Sun Apr 17, 2011 5:21 am
Model of CNC Machine: Shark Pro Plus (retired)
Location: Burien, WA USA

Re: Sheriff badge wall art

Post by FixitMike »

Be aware that the cherry will darken with age. In about 5 years there will be little contrast between the lettering and the wood. Don't ask how I know this.
Good judgement comes from experience.
Experience comes from bad judgement.

Beltramidave
Vectric Wizard
Posts: 525
Joined: Thu May 14, 2015 12:23 am
Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
Location: Bemidji, MN
Contact:

Re: Sheriff badge wall art

Post by Beltramidave »

FixitMike wrote:
Wed Sep 21, 2022 5:11 pm
Be aware that the cherry will darken with age. In about 5 years there will be little contrast between the lettering and the wood. Don't ask how I know this.
Thanks Mike. I am aware that it will darken. Anybody with suggestions with a better wood (available in midwest US). My original thought was walnut with gold lettering, but the client preferred cherry. Just had a request for another one, so I would be interested in hearing what others may suggest.
Dave
https://lakesedgewoodcraft.com/

User avatar
FixitMike
Vectric Wizard
Posts: 2173
Joined: Sun Apr 17, 2011 5:21 am
Model of CNC Machine: Shark Pro Plus (retired)
Location: Burien, WA USA

Re: Sheriff badge wall art

Post by FixitMike »

Gold or silver lettering sounds great. I think it would get better looking with age. Myself, I used hard maple, but you don't get the character that is there with cherry.
Good judgement comes from experience.
Experience comes from bad judgement.

User avatar
jarm2
Vectric Craftsman
Posts: 244
Joined: Wed Jun 13, 2012 9:16 pm
Model of CNC Machine: C&CNC electronics 4x4 ext aluminum table
Location: Harpster, Idaho

Re: Sheriff badge wall art

Post by jarm2 »

Great job on the center medallion. I have tried to do the Idaho seal with similar details and it is not nearly as good as you have done. Project overall looks very good. Thanks for sharing.
Aspire 11 ViaCAD Pro 12 Corel 2019 W 10, 2.2 kw spindle wireless pendant

User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Re: Sheriff badge wall art

Post by Creation in Wood »

Beautiful badge Dave
Thank You
Doug

Post Reply