Another one in work

Post by **CRFultz** » Thu Oct 23, 2008 3:10 pm

Here's one I'm working on...Happy so far but I think I'll raise the Background up a bit to make the diamond plate stand out some more.
I hand traced the diamonds from a web picture then copied and paste till I had enough to fill.
The bolt heads were placed on top of a two-rail sweep.
Then I pocket cut the inside and V-Carved the rest.
Over all height is just under .75"
Size is 18" square.

Chuck

Post by **DavidCousins** » Thu Oct 23, 2008 3:22 pm

Very nice work

Post by **lovebugjunkie** » Thu Oct 23, 2008 4:18 pm

Thanks for posting. Very nice results.

I love seeing peoples ideas/examples, really helps me with ideas. I have to be the most artistic challenged person known to man.

Post by **CRFultz** » Thu Oct 23, 2008 4:20 pm

lovebugjunkie wrote: I have to be the most artistic challenged person known to man.

If thats true, your one up on me.

Post by **NSchlee** » Thu Oct 23, 2008 5:28 pm

CRFultz wrote: The bolt heads were placed on top of a two-rail sweep.
Chuck

Chuck, have you thought of adding "Torque Markings" to the bolt heads??

Cool work!

Neal

Post by **CRFultz** » Thu Oct 23, 2008 5:36 pm

NSchlee wrote:
CRFultz wrote: The bolt heads were placed on top of a two-rail sweep.
Chuck
Chuck, have you thought of adding "Torque Markings" to the bolt heads??

Cool work!

Neal

Funny you should mention that....maybe 5 slash marks?

Post by **NSchlee** » Thu Oct 23, 2008 6:46 pm

Grade 8! only for bad ass bikers!

Post by **bill1** » Thu Oct 23, 2008 9:23 pm

Chuck,
Excellent, very nice

Post by **RoutnAbout** » Thu Oct 23, 2008 10:52 pm

Hey Chuck, I knew when I seen that diamond plate else where, I knew you were up to something... Looks GREAT.

Post by **Greasetattoo** » Fri Oct 24, 2008 3:12 pm

GREAT looking sign..
I would sit nice next to my 51' panhead..

Anyways,
Not to be biased or anything...
I think I could do that in VCP..
You should incorporate a hog head or something.

Waiting for the Aspire demo!

Post by **GripUs** » Sat Oct 25, 2008 2:14 pm

You have a '51 Panhead?? Lucky guy! Have you restored it? Do you ride it? My dream is a '65 ElectraGlide...the first year of electric start and the last year for the panhead.

Joe

Post by **Greasetattoo** » Sat Oct 25, 2008 4:11 pm

Well, I don't want to get off the topic..
But, it was hard to resist.

sorry if it bothered any one...

My other hobby..
WIP (work in progress)

Post by **bill1** » Sat Oct 25, 2008 9:10 pm

Just downloaded the trial version and this is my first try ever at making a 3d model
need lots of pratice.

Post by **moto633** » Sun Oct 26, 2008 12:58 am

Grease,

I like that you have all the KISS dolls hanging out with your pan

Sweet bike

Nick

Vectric Customer

Another one in work

Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work

Re: Another one in work