Here we have the latest from the woodwork shop. A 'keepsake box', 350mm x 250mm x 125mm. Solid teak wood, finger joints all round, antique affect fittings and latch with Linseed Oil finish.
Inside is a soft felt (My wife did this). I think it turned out OK
Teak Wood 'Keepsake Box'
-
- Posts: 17
- Joined: Wed Jul 12, 2017 3:48 pm
- Model of CNC Machine: Heinz S720
- Location: Thailand
- Tex_Lawrence
- Vectric Wizard
- Posts: 958
- Joined: Fri Mar 25, 2016 11:30 am
- Model of CNC Machine: Shapeoko3XXL; JTech7W; V-CarvePro 12.004
- Location: Dayton, Texas (Don't Mess With My Texas!)
Re: Teak Wood 'Keepsake Box'
Very nice box with lots of room to add interior "boxed" areas as needed, too.
How did you source the teak? The width of the joints remind me of wood flooring, but the splines in the top wouldn't be there.
How did you source the teak? The width of the joints remind me of wood flooring, but the splines in the top wouldn't be there.
Tex — Crooked Wood Products
Now there's a man with an open mind – you can feel the breeze from here.
Now there's a man with an open mind – you can feel the breeze from here.
-
- Posts: 17
- Joined: Wed Jul 12, 2017 3:48 pm
- Model of CNC Machine: Heinz S720
- Location: Thailand
Re: Teak Wood 'Keepsake Box'
Hi Tex, I am in Thailand and Teak is sold in the local wood stores. Its not wood flooring but 'Teak Strips' that I biscuit joint along the long edge that creates a panel and I cut from the panel
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
-
- Posts: 17
- Joined: Wed Jul 12, 2017 3:48 pm
- Model of CNC Machine: Heinz S720
- Location: Thailand
Re: Teak Wood 'Keepsake Box'
Cheers thank you
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Teak Wood 'Keepsake Box'
i agree, nice looking box. You could add a tray much like CarveOne did for the Paradise Box. Just do a search and you'll find the post here:
viewtopic.php?f=29&t=22766&p=164516&hilit=Paradise+Box+Tray+Carveone#p164516
Your wife did an excellent job on the liner. I always seem to struggle with those.
viewtopic.php?f=29&t=22766&p=164516&hilit=Paradise+Box+Tray+Carveone#p164516
Your wife did an excellent job on the liner. I always seem to struggle with those.