Latest carve in Maple
Latest carve in Maple
The latest carve off the machine. This was a large one, 16" in diameter, carved from 1.5" hard maple. Love carving maple, nice sharp details and minimal cleanup. Rough carved with a 1/4" BN, took about 2 hours. Finish pass was with a 1/16"TBN RIP bit, about 11 hours at 8% step over, 150IPM. Customer hasn't decided on the finish yet.
- scotttarnor
- Vectric Wizard
- Posts: 944
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
- jarm2
- Vectric Craftsman
- Posts: 246
- Joined: Wed Jun 13, 2012 9:16 pm
- Model of CNC Machine: C&CNC electronics 4x4 ext aluminum table
- Location: Harpster, Idaho
Re: Latest carve in Maple
Excellent work. Nice sharp details and really attractive. Thanks for sharing.
Aspire 11 ViaCAD Pro 12 Corel 2019 W 10, 2.2 kw spindle wireless pendant
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Latest carve in Maple
VERY clean cut,and a good choice of finish bit as it brought out the Hummingbirds beautifully!!
Good work!
scott
Good work!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Latest carve in Maple
Beautiful.
How did you create the model?
I can imagine how that would look if all the details were painted or color stained.
Beautiful
How did you create the model?
I can imagine how that would look if all the details were painted or color stained.
Beautiful
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
Re: Latest carve in Maple
The hummingbirds came from 3dWave, I assembled the rest using Vectric clipart.
- scotttarnor
- Vectric Wizard
- Posts: 944
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: Latest carve in Maple
You did an awesome job assembling this! I hope to get my skills to this level with time.
Scott T
@scottscnc
@scottscnc
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Latest carve in Maple
Sometimes things like that "look" crowded, but yours does not.
It is well arranged, clean, artistic.
I like it a lot.
It is well arranged, clean, artistic.
I like it a lot.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
Re: Latest carve in Maple
Thanks! It was a fun project.
-
- Vectric Apprentice
- Posts: 68
- Joined: Sat Sep 17, 2016 1:56 am
- Model of CNC Machine: PDJ pilot pro
- Location: Calgary Alberta
Re: Latest carve in Maple
I love the crispness of the detail!
- JoeBlow
- Vectric Craftsman
- Posts: 135
- Joined: Wed Nov 21, 2018 11:19 am
- Model of CNC Machine: AxiomAR6Pro
Re: Latest carve in Maple
Wow! That is beautiful!
.
Most impressed with your management of the maple. Your glue-up is spot on. Had to magnify pics to max and put glasses on to inspect .
I maybe count 4 pieces....
.
Most impressed with your management of the maple. Your glue-up is spot on. Had to magnify pics to max and put glasses on to inspect .
I maybe count 4 pieces....
Patrick
The hurrier I go, the behinder I get
The hurrier I go, the behinder I get