Crayon Box Wall Clock

This is the place to post images of work produced using Aspire
Post Reply
RalphPitz
Posts: 32
Joined: Sat Jun 18, 2011 2:44 am
Model of CNC Machine: Shark Pro Plus

Crayon Box Wall Clock

Post by RalphPitz »

Thank you, Michael Tyler, for the great Crayon Box Wall Clock project. Here is my version of your model. I had to size up the whole project to fit an old clock I had – so the project ended up being about 14” x 23”. The model height was a little over 1” so I glued up the base and front boards first, then carved the model. Due to limitations of my CNC, I had to use tiling toolpaths through the Y axis and made it a double-sided job so I could do some pocketing on the backside for the clock movement. Since I had to work on the back side, I decided to carve a favorite toy of the grandsons - shield and swords. As you can see by the date on the back, I finished earlier than I thought I would.
Attachments
IMG_20210518_200808343.jpg
IMG_20210518_201440090.jpg
IMG_784.jpg
IMG_153.jpg

User avatar
mtylerfl
Vectric Archimage
Posts: 5493
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Crayon Box Wall Clock

Post by mtylerfl »

Super-cool work, Ralph! Thank you for posting the pics and description of the job.

The sword/shield carving on the backside is extra-cool!!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
scotttarnor
Vectric Wizard
Posts: 561
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Crayon Box Wall Clock

Post by scotttarnor »

Wow That came out great!
Scott T

Post Reply