Laser Stage Coach

This is the place to post images of work produced using Aspire
Post Reply
User avatar
dhellew2
Vectric Wizard
Posts: 1254
Joined: Thu May 22, 2008 10:14 pm
Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
Location: Royal City Washington

Laser Stage Coach

Post by dhellew2 »

Latest laser project created in Aspire. The coach and horse length is about 40 inches, base is 48x11 inches.
Baltic Birch plywood 6mm with leather straps. Horses are 'puzzle' assembly.
Dale
stage coach.jpg
stage coach 2.jpg
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale

User avatar
mtylerfl
Vectric Archimage
Posts: 5493
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Laser Stage Coach

Post by mtylerfl »

Wow - that came out great, Dale! Looks like a bit of hand harness/work there, too!

Are the “tires” on each of the wagon wheels a very thin-cut “ring”?
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

SteveNelson46
Vectric Wizard
Posts: 1299
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger/WinCNC
Location: Tucson, Az.

Re: Laser Stage Coach

Post by SteveNelson46 »

Nice, really nice. It was probably a lot of work but a lot of fun also.
Steve

garylmast
Vectric Wizard
Posts: 1232
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: Laser Stage Coach

Post by garylmast »

Nice project Dale.

Gary

User avatar
dhellew2
Vectric Wizard
Posts: 1254
Joined: Thu May 22, 2008 10:14 pm
Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
Location: Royal City Washington

Re: Laser Stage Coach

Post by dhellew2 »

Michael, the wheel rim is a shallow laser cut. Sometimes I engrave but it does take longer. Thanks everyone for the comments. Dale :D
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale

Post Reply