2021 User Group Meeting - San Diego

This is the place to post images of work produced using Aspire
Post Reply
Stephanie Downing
Vectric Staff
Posts: 372
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

2021 User Group Meeting - San Diego

Post by Stephanie Downing »

We are delighted to announce we are now taking new bookings for our upcoming User Group Meeting which will be taking place at the DoubleTree by Hilton San Diego hotel on the 10th & 11th September 2021!!

BOOK your place here: https://portal.vectric.com/usergroup/signup/us/2021

To help minimise costs, we have teamed up with the DoubleTree by Hilton San Diego hotel to offer a discounted accommodation rate of $159 per night (please note, this room rate excludes breakfast. Breakfast can be added for an additional $20 at the hotel is you choose).

To book your room at the discounted rate click the link below:
https://book.passkey.com/gt/218052603?g ... db0cd154fd

Please note, rooms at our discounted rate are limited so make sure you book early to avoid disappointment.

We'll be packing both days full covering; ‘What's New’ in version 11 along with projects and ideas to increase your knowledge and efficiency using the software. As well as the technical benefits, the User Group Meeting gives like-minded CNC enthusiasts the opportunity to get together, showcase their projects and share knowledge.

As with previous meetings, the meeting will take place over two days and will have a strong focus on our Aspire and VCarve software with some of the sessions also being relevant to Cut2D.

The fee per person to attend is $249.00, which includes refreshments and lunch throughout both days as well as a welcome pack, access to all of the presentations and a free gift.

We were overwhelmed by the love and support we received for our first ever online worldwide User Group Meeting this year and felt it was fantastic for bringing our users from around the world together to share their projects, experience, tips and advice.

With that in mind, going forward we have decided to alternate our User Group Meetings each year, which means we will be holding our next online worldwide User Group Meeting in 2022! We’ll keep you posted on the 2022 dates. To make sure you do not miss anything sign up to our newsletter here: https://vectricltd.cmail19.com/t/r-l-ju ... tuidklh-k/
400x400_UGM_Logo_2021_Date.jpg

User avatar
highpockets
Vectric Wizard
Posts: 3353
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: 2021 User Group Meeting - San Diego

Post by highpockets »

Already booked our reservations and ready to go....
John
Maker of Chips

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4247
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: 2021 User Group Meeting - San Diego

Post by Rcnewcomb »

I'm booked and looking forward to it!
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

SteveNelson46
Vectric Wizard
Posts: 1012
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger using WinCNC
Location: Tucson, Az.

Re: 2021 User Group Meeting - San Diego

Post by SteveNelson46 »

I'm booked also. Am I correct in assuming that if I paid for the 2020 UGM in San Diego that I am already registered for the 2021 UGM?
Steve

User avatar
gkas
Vectric Wizard
Posts: 1050
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: 2021 User Group Meeting - San Diego

Post by gkas »

The wife and I are looking forward to it..... All booked.

Stephanie Downing
Vectric Staff
Posts: 372
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2021 User Group Meeting - San Diego

Post by Stephanie Downing »

SteveNelson46 wrote:
Thu Oct 22, 2020 5:42 pm
I'm booked also. Am I correct in assuming that if I paid for the 2020 UGM in San Diego that I am already registered for the 2021 UGM?
Hi Steve,

That is correct, as you purchased your ticket for the 2020 event and didn't cancel your booking you're all set for the 2021 event.

Remember, you will need to re-book your hotel room, should you need one as none of the reservations were moved to next years event.

Thanks
Stephanie

SteveNelson46
Vectric Wizard
Posts: 1012
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger using WinCNC
Location: Tucson, Az.

Re: 2021 User Group Meeting - San Diego

Post by SteveNelson46 »

Stephanie Downing wrote:
Mon Oct 26, 2020 8:59 am
SteveNelson46 wrote:
Thu Oct 22, 2020 5:42 pm
I'm booked also. Am I correct in assuming that if I paid for the 2020 UGM in San Diego that I am already registered for the 2021 UGM?
Hi Steve,

That is correct, as you purchased your ticket for the 2020 event and didn't cancel your booking you're all set for the 2021 event.

Remember, you will need to re-book your hotel room, should you need one as none of the reservations were moved to next years event.

Thanks
Stephanie
Thanks Stephanie. I've already taken care of the hotel reservations.
Steve

Post Reply