Jaguar on Branch Intarsia

This is the place to post images of work produced using Aspire
Post Reply
garylmast
Vectric Wizard
Posts: 1122
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Jaguar on Branch Intarsia

Post by garylmast »

I got the design from Kathy Wise Designs, but she teases you. She shows a picture of the Jaguar complete with a bunch of plants and other animals, but she only would sell me the line art of the Jaguar lying on a branch.

I decided to add my own clipart, some from other intarsias and some I drew. Everything was done in Aspire! Size is 64” x 42”. I started counting how may parts there was, but after I took my shoes off and got past 20, I lost count.

Gary
Attachments
Jaguar.jpg

User avatar
scottp55
Vectric Wizard
Posts: 4039
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Jaguar on Branch Intarsia

Post by scottp55 »

You have some Amazing patience and skill Gary!!
Well Done!
scott

(Oh...I have some Snakewood....can't seem to find Jaguarwood anywhere :wink: )
"Buy your second machine....First"
common cnc saying


scott

User avatar
mtylerfl
Vectric Wizard
Posts: 5119
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Jaguar on Branch Intarsia

Post by mtylerfl »

Very nice, Gary! That was a lot of work and you did a fantastic job!

What did you use for the backing? (What thickness?)
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
scotttarnor
Vectric Wizard
Posts: 307
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Jaguar on Branch Intarsia

Post by scotttarnor »

Wow! Very Nice!
Scott T

ich-fräs-das
Posts: 3
Joined: Wed Oct 07, 2020 7:39 am
Model of CNC Machine: BZT PFE1000-PX
Location: South of Hamburg, Germany

Re: Jaguar on Branch Intarsia

Post by ich-fräs-das »

That`s art.

garylmast
Vectric Wizard
Posts: 1122
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: Jaguar on Branch Intarsia

Post by garylmast »

What did you use for the backing? (What thickness?)
Michael, I use 1/8-in tempered hardboard for the backing. The different wood I used was all 4/4 except for the frame where I used 5/4 oak. To set the different thickness of each piece, I used both the round and flat shape, while adjusting the Angle and Base Height. I always had the Limit to Height set, which sometimes didn't work, so I would double check the Z height of each piece and set it to the height I wanted. The distance between each vector I set at .03-inch. Thanks everyone for the complement.

Gary

csbrads
Posts: 24
Joined: Tue Apr 07, 2020 10:58 am
Model of CNC Machine: Shopbot PRT 48 x 96

Re: Jaguar on Branch Intarsia

Post by csbrads »

Wow, very nice work.

Post Reply