Haven't posted anything in a while. This one was fun. Double sided HDU sign.
We did some mix media on this. The banner was printed on vinyl then applied to ACM and mounted to the sign. The Bee and Honey Pot is laser engraved plastic and mounted to the sign. Everything else is painted.
Faux Wood Cabin Sign
- customquint
- Vectric Craftsman
- Posts: 240
- Joined: Tue Jan 25, 2011 4:18 am
- Model of CNC Machine: AXYZ
- Location: Piqua, OH
- Contact:
-
- Vectric Craftsman
- Posts: 193
- Joined: Sun Nov 04, 2012 4:27 pm
- Model of CNC Machine: PRS Buddy48alpha ,4x6' 130w laser, Wazer
Re: Faux Wood Cabin Sign
How do you cut the ACM? I would cut the outline from Signgrade acrylic [impact modified] on the laser- if printed on pvc-free film it could be applied and then contour cut quite easily/quickly. Nice sign BTW
- customquint
- Vectric Craftsman
- Posts: 240
- Joined: Tue Jan 25, 2011 4:18 am
- Model of CNC Machine: AXYZ
- Location: Piqua, OH
- Contact:
Re: Faux Wood Cabin Sign
We used an .1875 end mill to cut the ACM. We did the print on vinyl and added a matte laminate. The print had a 1/2" bleed on the shape. We aligned the print to the ACM and applied then trimmed the vinyl to the shape.
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA