Scallop Shell

This is the place to post images of work produced using Aspire
Post Reply
User avatar
Leo
Vectric Wizard
Posts: 4082
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Scallop Shell

Post by Leo »

LOTS of firsts for me here.
I created the Aspire model from scratch. Getting a little better each time I try something. This took me about 1.5 to 2.0 hours.
Machined it out, did a little bit of sanding.
First time for sandblasting anything.
I then distressed and painted. I dry brushed for first time.
I am pretty happy with it.
IMG_9563.JPG
IMG_9564.JPG
IMG_9565.JPG
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Scallop Shell

Post by mtylerfl »

Congrats, Leo! Your shell and finish technique look great!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
TReischl
Vectric Wizard
Posts: 4589
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: Scallop Shell

Post by TReischl »

Looks good Leo!
"If you see a good fight, get in it." Dr. Vernon Johns

garylmast
Vectric Wizard
Posts: 1580
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: Scallop Shell

Post by garylmast »

Good job Leo, looks great.

Gary

User avatar
SteveNelson46
Vectric Wizard
Posts: 2282
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: Scallop Shell

Post by SteveNelson46 »

Looks great, Leo. Especially the finish.
Steve

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Scallop Shell

Post by highpockets »

Nice job Leo!!!
John
Maker of Chips

Savannahdan
Vectric Wizard
Posts: 520
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: Scallop Shell

Post by Savannahdan »

Job well done, Leo.

Bob Reda
Vectric Wizard
Posts: 858
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: Scallop Shell

Post by Bob Reda »

Very nice Leo

Bob

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Scallop Shell

Post by scottp55 »

NEAT Leo!! :)
What was the material?
Old Dogs CAN learn new tricks!! :) :)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
Leo
Vectric Wizard
Posts: 4082
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Re: Scallop Shell

Post by Leo »

Scott, just a 2x10 from Lowes
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Scallop Shell

Post by scottp55 »

Thanks Leo!
Then a Really nice job! :)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

alfredom
Posts: 26
Joined: Sat Mar 21, 2020 8:18 pm
Model of CNC Machine: Shapeoko 3 xxl
Location: Fairfield California
Contact:

Re: Scallop Shell

Post by alfredom »

Very nice job and finish!

User avatar
scotttarnor
Vectric Wizard
Posts: 941
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Scallop Shell

Post by scotttarnor »

That looks awesome!
Scott T

@scottscnc

Post Reply