A colleague I have worked with for 17 years retired from the company, As he is an avid boat guy I decided to do the Gentleman’s Valet Box for him. To make the box more personal I added his name to the front of the box and engraved a small text inside the box.
The wood I used was teak and for the lid I used ash, for the inlay I used pine.
On the bottom I engraved a text from me why I did the box:
This Genleman’s Valet Box was created by me in May 2020 on my CNC-machine as a thank you for all the things that you taught med at the years on XXXXXX
The text on the inside is from a quote of James Taylor:
Being on a boat that's moving through the water, it's so clear. Everything falls into place in terms of what's important and what's not.
As you can imagine, the gift was a great success.
Gentlemans Valet Box - my version
-
- Vectric Craftsman
- Posts: 130
- Joined: Tue Feb 06, 2018 9:18 pm
- Model of CNC Machine: CNC 6040, Vectric Aspire, UCCNC
- Location: Skane, Sweden
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Gentlemans Valet Box - my version
Nice job!
I can see why it was well received.
Things that are personalized are so much more appreciated nowadays!
Well Done!!
scott
I can see why it was well received.
Things that are personalized are so much more appreciated nowadays!
Well Done!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Gentlemans Valet Box - my version
Looks very nice!!!
I'm with Scott on the personalized aspect of a gift... handmade trumps factory-made almost every time!
Thanks for sharing... and again... very nice!
I'm with Scott on the personalized aspect of a gift... handmade trumps factory-made almost every time!
Thanks for sharing... and again... very nice!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Gentlemans Valet Box - my version
Nice looking box. Personalization doubles the meaning. of a gift..
Steve