Sign up for our 2020 Worldwide Virtual User Group Meeting
- Leo
- Vectric Wizard
- Posts: 4082
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
Ordered the additional DVD project files
I have been able to watch several of the sessions LIVE.
ABSOLUTELY FANDYTASTIC - Loving it.
I have been able to watch several of the sessions LIVE.
ABSOLUTELY FANDYTASTIC - Loving it.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- SteveNelson46
- Vectric Wizard
- Posts: 2282
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
I was very impressed with Edward Powell's presentation on Photo V-carve. I have seen many professional and motivational speakers and his was one of the best. I learned a lot from the way he presented the information and from the content itself. Now I'm motivated to give some of his techniques a try.
Steve
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
Hey everyone,
Thank you so much for all your wonderful feedback
We can't wait to get started with today's sessions, thank you so much for joining us. We have been overwhelmed by all of the support we have received from the community for this years online event. We are so lucky to have you all.
Thank you so much for all your wonderful feedback
We can't wait to get started with today's sessions, thank you so much for joining us. We have been overwhelmed by all of the support we have received from the community for this years online event. We are so lucky to have you all.
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
We're going LIVE in 15 minutes with Software Developer Mike!
Do you want to be able to automate your workflow, create vectors and output toolpaths programmatically? In this talk one of Vectric’s developers, Mike Jarrett, will be walking you through the basics of how to create your own gadgets from scratch, and by the end you should be well prepared to start writing your own custom features.
Tune in here: https://ugm.vectric.com/live"
Do you want to be able to automate your workflow, create vectors and output toolpaths programmatically? In this talk one of Vectric’s developers, Mike Jarrett, will be walking you through the basics of how to create your own gadgets from scratch, and by the end you should be well prepared to start writing your own custom features.
Tune in here: https://ugm.vectric.com/live"
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
Coffee ready for day three. Can’t believe it’s day three already. Kudos to all the hard work the Vectric staff has put into the Users Group Meeting. I just hope I can remember all the tips I have learned so far. You guys have far exceeded my expectations for the virtual meeting.
Ron
Ron
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
Thanks Ron.
That's the beauty of this years online format! You don't have to worry about remembering all of the top tips in each session, you can come back to the video's and refresh your memory whenever you're ready
That's the beauty of this years online format! You don't have to worry about remembering all of the top tips in each session, you can come back to the video's and refresh your memory whenever you're ready
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
We're going LIVE in 15 minutes! Gary the Gorilla is back
Is the part you want to make too thick for your CNC? Maybe you have thought about using the slicing feature in your software but you're unsure how well it would work? Using the gorilla head Todd showed you how to model in his last session, he will show you how to slice it up, add in a system to align all the slices, and then cut it out of MDF. Of course, he won't stop there, and you'll be given an in shop view of how it was assembled and finished!
Tune in here: https://ugm.vectric.com/live
Is the part you want to make too thick for your CNC? Maybe you have thought about using the slicing feature in your software but you're unsure how well it would work? Using the gorilla head Todd showed you how to model in his last session, he will show you how to slice it up, add in a system to align all the slices, and then cut it out of MDF. Of course, he won't stop there, and you'll be given an in shop view of how it was assembled and finished!
Tune in here: https://ugm.vectric.com/live
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
Only 15 minutes to go until we bring you a Toy Truck created by Tim Sway
Ever thought about where you would start to create a replica of a real life item in Aspire? Tim Sway of Tim Sway perspectives has the answers, he'll be showing us how he created a replica of his truck. Why not come along for the ride? You might learn something new.
Tune in here: https://ugm.vectric.com/live
Ever thought about where you would start to create a replica of a real life item in Aspire? Tim Sway of Tim Sway perspectives has the answers, he'll be showing us how he created a replica of his truck. Why not come along for the ride? You might learn something new.
Tune in here: https://ugm.vectric.com/live
- Leo
- Vectric Wizard
- Posts: 4082
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
WOW - so much GOLDEN information.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
We're going LIVE in 15 minutes with Beki
Nothing beats custom made gifts for that personal touch, and there is a lot of money to be made in this industry! In this session Beki will be showing you how to create a typical custom product and shows you how Vectric software has lots of efficient tools to quickly and easily swap out interchangeable parts to get jobs done in no time, ensuring there’s plenty more time for you to stick your feet up!
Tune in here: https://ugm.vectric.com/live
Nothing beats custom made gifts for that personal touch, and there is a lot of money to be made in this industry! In this session Beki will be showing you how to create a typical custom product and shows you how Vectric software has lots of efficient tools to quickly and easily swap out interchangeable parts to get jobs done in no time, ensuring there’s plenty more time for you to stick your feet up!
Tune in here: https://ugm.vectric.com/live
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
Our Support team will be up in 15 minutes!!
Three of the Vectric support team have teamed up to bring your the top 10 things they wish they had known when they started using Vectric software. Whether you're just starting out in CNC or whether you've been on board with us since the beginning you're bound to pick up something of interest in this enlightening session!
Tune in here: https://ugm.vectric.com/live
Three of the Vectric support team have teamed up to bring your the top 10 things they wish they had known when they started using Vectric software. Whether you're just starting out in CNC or whether you've been on board with us since the beginning you're bound to pick up something of interest in this enlightening session!
Tune in here: https://ugm.vectric.com/live
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
We're going LIVE in 15 minutes welcome back Avid CNC!
Sami and Cory are back for a second time in the schedule, this time to talk about advanced toolpath strategies when you're using aluminium and brass.
Tune in here: https://ugm.vectric.com/live
Sami and Cory are back for a second time in the schedule, this time to talk about advanced toolpath strategies when you're using aluminium and brass.
Tune in here: https://ugm.vectric.com/live
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
The end of the show, show! With Michael Tyler
Join Michael Tyler on a journey through time as he reveals his secrets to how, over the years he has created the unique finishes shown within his monthly projects. For the last project of this years User Group Meeting we've left it to Michael to close the event leaving you feeling inspired to go away and try out some of his timeless techniques.
Tune in here: https://ugm.vectric.com/live
Join Michael Tyler on a journey through time as he reveals his secrets to how, over the years he has created the unique finishes shown within his monthly projects. For the last project of this years User Group Meeting we've left it to Michael to close the event leaving you feeling inspired to go away and try out some of his timeless techniques.
Tune in here: https://ugm.vectric.com/live
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
The end of the show, show! With Michael Tyler
Join Michael Tyler on a journey through time as he reveals his secrets to how, over the years he has created the unique finishes shown within his monthly projects. For the last project of this years User Group Meeting we've left it to Michael to close the event leaving you feeling inspired to go away and try out some of his timeless techniques.
Tune in here: https://ugm.vectric.com/live
Join Michael Tyler on a journey through time as he reveals his secrets to how, over the years he has created the unique finishes shown within his monthly projects. For the last project of this years User Group Meeting we've left it to Michael to close the event leaving you feeling inspired to go away and try out some of his timeless techniques.
Tune in here: https://ugm.vectric.com/live
-
- Vectric Staff
- Posts: 555
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Sign up for our 2020 Worldwide Virtual User Group Meeting
We're sorry to say that we have come to the end of our 2020 worldwide User Group Meeting but what a journey it has been!
Thank you to everyone who joined in on the live sessions for all your questions, comments and contributions!
We will be keeping the dedicated User Group Meeting site up with all of the video's, chats and projects from this years event so that you can watch them over and over again! https://ugm.vectric.com/home
Keep your eyes peeled for updates coming soon on the 2021 Vectric User Group Meeting!
Thank you so much for having us on your screens for three whole days
Thank you to everyone who joined in on the live sessions for all your questions, comments and contributions!
We will be keeping the dedicated User Group Meeting site up with all of the video's, chats and projects from this years event so that you can watch them over and over again! https://ugm.vectric.com/home
Keep your eyes peeled for updates coming soon on the 2021 Vectric User Group Meeting!
Thank you so much for having us on your screens for three whole days