Sign up for our 2020 Worldwide Virtual User Group Meeting

This is the place to post images of work produced using Aspire
Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

Hi John,

Send the images and what you would like updates to online@vectric.com and I can update your post for you.

Thanks
Stephanie

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

🎬 JD Chambers of Rainfall Projects is joining our online UGM in 15 mins. This is your last chance to grab your coffee and settle in!

JD is going to be talking through how he created some of his favourite projects, both inside and outside the software. In this session JD will be joined by Sami Woolhiser of Avid CNC. We can't wait to hear all about their experience of the software and pick up some of their tips and advice for the best materials and tools for the job.

Tune in at 6pm BST here: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_JD_RainfallProjects.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

LIVE NOW

Todd's showing you a few interesting ways to use your laser to add more perceived depth to your low relief 3D carvings and how to add a unique text effect (something that is impossible to do with VCarving). If you're on the fence about upgrading your CNC with a laser, this will be well worth the time.

Tune in at: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_LaserModule.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

All the way from Portland, Oregon Sami and Cory of Avid CNC will be joining joining our online UGM in 15 mins to give their advice for using advanced toolpath strategies when working with plywood and plastics!

Tune in at: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_Sami_Cory_Avid.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

WOW! What a fantastic day yesterday was!

We really hope you managed to tune in to some of the sessions of Day 1!!

We have another day packed full of sessions today so I hope you managed to get plenty of sleep :D

🎬 We're going LIVE in 15 minutes!

Beki will be kicking us off this morning with an awesome session on creating slot together animal furniture. Beki will be covering the concepts of how to create slot together animals using many of the drawing tools and some top tips on how to approach slot together assembly.

Tune in here: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_ZooTopia.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

🎬 In 15 minutes we're bringing you Jay Johnson of J - Tech Laser

Jay will be showcasing how to create a hybrid CNC and Laser projects!

Tune in here: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_JayJohnson_Laser.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

🎬 We're going LIVE in 15 minutes!

Are you interested in learning more about modeling in Aspire, or maybe your a budding 3D modeler and want to add a few new tricks to your toolbox? In this session, Todd will take you through the steps he took to create a 3D model of a Gorilla head. Starting with drawing the vectors needed to develop the proper 3D shapes, create complicated components, and then 3D sculpting everything together to create the finished head.

Tune in here: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_WildInAspire.jpg

User avatar
scottp55
Vectric Wizard
Posts: 3964
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by scottp55 »

My alarm clock on my computer is becoming VERY useful in the last day Stephanie! :D
You guys are doing a Wonderful job!!
Kudos to all Staff that sit in to answer Chat questions!!
scott
(Of course you have to set the alarm accurately!! :oops: :oops: )
"When in doubt....Zero it out!"
anon saying


scott

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

scottp55 wrote:
Fri Sep 25, 2020 3:07 pm
My alarm clock on my computer is becoming VERY useful in the last day Stephanie! :D
You guys are doing a Wonderful job!!
Kudos to all Staff that sit in to answer Chat questions!!
scott
(Of course you have to set the alarm accurately!! :oops: :oops: )
Thank you so much Scott :D

The email reminders for each session are proving to be super helpful too.

All of the Vectric team are enjoying being available in the chat to answer questions and to chat with you all. We are so grateful for you guys taking the time out to be a part of the event.

Hopefully tomorrow you'll have better luck with that alarm ;)

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

🎬 We're going LIVE in 15 minutes with Edward!

Get ready to deep dive in to photo v-carving in our VCarve and Aspire software. Edward will showcasing some advanced techniques to creating some awesome photo projects.

Tune in here: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_PhotoVCarving_Ed.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

🎬 Only 15 minutes to go until we bring you Michael Mezalick and Axiom Precision!

For the 2020 Vectric Worldwide User Group Meeting the Axiom team will demonstrate building a Coat of Arms using only 3D clipart provided in our Aspire software. They will be adding a twist to the project as they cannot cut apart, or delete, any part of the components we are using!!

Tune in here: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_Axiom_3DModel.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

🎬 We're going LIVE in 15 minutes with Technical Director Adam James!

Adam will talk through the process of designing and machining a tileable panel moulding. Along the way you will learn how to create your own repeating tiles using some of the less frequently used tools in the products. After watching along you'll be able to apply the same techniques to create your very own repeating patterns.

Tune in here: https://ugm.vectric.com/live
Attachments
1280X720px_Thumbnail_UGM_Components_Adam.jpg

Stephanie Downing
Vectric Staff
Posts: 370
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

Were bringing you Randy Johnson of Nexwave CNC 🎬

Randy Johnson of Nextwave CNC will be taking this opportunity to walk you through how to create textured bowls in VCarve and Aspire using the fluting toolpath.

Tune in here: https://ugm.vectric.com/live
1280X720px_Thumbnail_UGM_nextwave_new.jpg

User avatar
scotttarnor
Vectric Craftsman
Posts: 269
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by scotttarnor »

Holy Cow! This has been awesome so far! My favorite so far was Axioms presentation, just that presentation I feel was worth $49 I learned soo much !
I also can not wait to try making a bowl now!

Thank You Vectric Staff !
Scott T

User avatar
scotttarnor
Vectric Craftsman
Posts: 269
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by scotttarnor »

Holy Cow! This has been awesome so far! My favorite so far was Axioms presentation, just that presentation I feel was worth $49 I learned soo much !
I also can not wait to try making a bowl now!

Thank You Vectric Staff !
Scott T

Post Reply