Sign up for our 2020 Worldwide Virtual User Group Meeting

This is the place to post images of work produced using Aspire
Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

It wouldn't be a Vectric User Group Meeting without our very own Michael Tyler!

This year Michael will be joining us for TWO spectacular sessions! Tune in for Michael's 'Believe it or else!' on Thursday 24th September at 3pm BST and on Saturday 26th September at 8pm BST for his 'funtabulous finishing techniques' sessions!

We can't wait!

Remember, even if you can't tune in at the time's we'll be streaming these sessions live you can always watch afterwards at a time to suit you! Subscribe here to ensure you are kept up to date with how to access these sessions! https://www.vectric.com/vectric-communi ... oupMeeting
1080x1080_UGM_BelieveItOrElse_MikeTyler_Part1.jpg

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

We are excited to share the full agenda for our first ever worldwide User Group Meeting - Starting Thursday 24th at 11am BST!!

If you have signed up to the event and you received a sneak peek at the agenda you will notice some small changes to the timings and schedule.

We can't wait to get everyone together for our three day event later this week!!

We will be emailing out the details of how to access the live sessions to everyone subscribed to this years event very soon so keep an eye on your emails!!

Remember if you can't tune in and watch the sessions live at the times shown below, we will be keeping the session video's available for you to watch at a time to suit you so that you don't miss out!

Happy days :D
Agenda_A4_SEPT21.jpg

martindg
Vectric Craftsman
Posts: 107
Joined: Thu Nov 28, 2019 6:12 am
Model of CNC Machine: Onefinity X-50 Woodworker
Location: Fresno, CA

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by martindg »

Do you have a sense for how soon the recordings will be posted following the sessions?

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

Hi martindg,

The sessions will be available immediately after they have been streamed, there won't be any delay :)

Thanks
Stephanie

martindg
Vectric Craftsman
Posts: 107
Joined: Thu Nov 28, 2019 6:12 am
Model of CNC Machine: Onefinity X-50 Woodworker
Location: Fresno, CA

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by martindg »

That's excellent. Thanks.

User avatar
SteveNelson46
Vectric Wizard
Posts: 2282
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by SteveNelson46 »

Stephanie,

How soon will you be able to give us the links for the live presentations and the downloads?
Steve

johntech2014
Posts: 21
Joined: Wed Jan 17, 2018 7:32 pm
Model of CNC Machine: CNC Router Parts

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by johntech2014 »

How will we be connecting to the online meeting? I want to make sure all my connections are ready to go before they start!!

Thank you

John

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

Hi,

Thanks for your questions!

We will be sending an email out today to everyone who has subscribed to the event with all the details you need to access the sessions!

We can't wait!

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by highpockets »

Stephanie, the Online UGM site is Amazing!!!

Update: Wow!!! Just noticed the schedule times are showing my time zone THANK YOU!!! No doing math a 5AM :lol: :lol: :lol:

The Vectric TEAM has done it again....
John
Maker of Chips

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

Thank you so much for your feedback John!!

We are thrilled and super excited to be able to share this with you all today. We can't wait to see the projects, tips and advice shared amongst our community. :D

If you haven't had chance yet - check out the 2020 User Group Meeting site here: https://ugm.vectric.com/home

Beki has created an amazing tour of the site video to get you ready for Thursday, take a look on the home page!
UGM_Instagram_1080x1080px_01.jpg

User avatar
ohiolyons
Vectric Wizard
Posts: 1701
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by ohiolyons »

Ditto site seems well laid out
John Lyons
CNC in Kettering, Ohio

User avatar
ohiolyons
Vectric Wizard
Posts: 1701
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by ohiolyons »

Ditto site seems well laid out. Time zone change a nice touch!
John Lyons
CNC in Kettering, Ohio

User avatar
RobertD
Vectric Apprentice
Posts: 67
Joined: Sat Feb 07, 2015 3:45 am
Model of CNC Machine: Centroid Acorn
Location: Ontario, Canada

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by RobertD »

Beki

When do the invitations come out to us?? Just anxious i guess..

Bob Dymock

User avatar
rtibbs
Vectric Wizard
Posts: 411
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by rtibbs »

Got mine and the website looks fabulous!!!
I think I can even follow along :))

Stephanie Downing
Vectric Staff
Posts: 555
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Sign up for our 2020 Worldwide Virtual User Group Meeting

Post by Stephanie Downing »

Hi Bob,

You should have received an email this afternoon with everything you need to know.

Alternatively, you can access the site here: https://ugm.vectric.com/home

If you would like to contribute by adding your own show & tell projects or be involved in the chat functions throughout, simply click on the green circle with the ? in the top right corner and complete the process to log-in.

If you don't receive your email please check your junk folder :)

Thanks
Stephanie

Post Reply