First Lithograph effort
-
- Posts: 3
- Joined: Wed May 24, 2017 10:31 pm
- Model of CNC Machine: Vertigo, Meistergram and Gravograph IS40
- Location: Dannevirke New Zealand
First Lithograph effort
Hi, Thought i would post this photo of my first lithograph project.. Very happy with result. Havn't made a box for it yet. Took a while to do but I could have managed the 'feeds and speeds' a bit better, but as I am new to the whole Aspire software and 3D routing in general there is lots to learn. 6mm Glacier white Corian. Final pass with a 0.12 mm width standard D bit. Just watched the 'lithophane' tutorial video a couple of times and then jumped in... One thing tho. The machine bed needs to be FLAT, as in FLAT before starting. Oh also have to watch lettering too, that's supposed to be NY not YN. Traps for young players
- jimandi5000
- Vectric Wizard
- Posts: 1050
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: First Lithograph effort
Barring the mirror effect...VERY nice for first (or Any:) lithograph!!
Congrats!!
scott
Congrats!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
Re: First Lithograph effort
Well done.
Phil
Phil
-
- Posts: 26
- Joined: Sat Mar 21, 2020 8:18 pm
- Model of CNC Machine: Shapeoko 3 xxl
- Location: Fairfield California
- Contact:
Re: First Lithograph effort
Very nice, well done job.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: First Lithograph effort
Excellent lithophane work!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: First Lithograph effort
Kinda funny about the NY being backwards.
This is how we learn right?
Great job though.
I like it.
This is how we learn right?
Great job though.
I like it.
“I've learned so much from my mistakes, I'm thinking of making a few more”
- dhellew2
- Vectric Wizard
- Posts: 1322
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: First Lithograph effort
Looks great
Just wondering, did you take the photo from the uncut side? That would explain the mirrored glasses and reversed NY
Dale
Just wondering, did you take the photo from the uncut side? That would explain the mirrored glasses and reversed NY
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
- Xxray
- Vectric Wizard
- Posts: 2300
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: First Lithograph effort
Looks like it turned out nice, generally lithos only need 1 pass if you are looking to save some time
Doug
-
- Posts: 16
- Joined: Fri Jun 29, 2018 2:31 pm
- Model of CNC Machine: Shark HD4
- Location: 1012 grey eagle dr Crossville,TN,38572
Re: First Lithograph effort
project im working on
set of die but each face is a lithograph
set of die but each face is a lithograph
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: First Lithograph effort
Those Lithophane dice are cool, Greg!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC