Put a rope around this virus

This is the place to post images of work produced using Aspire
Post Reply
User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Put a rope around this virus

Post by rtibbs »

Thanks to Michael for the file. Hope you don't mind my embellishing it somewhat
RT
Rosie w_rope border.jpg

User avatar
scottp55
Vectric Wizard
Posts: 3693
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Put a rope around this virus

Post by scottp55 »

Excellent Ron! :)
Nice detailed crisp job!
I've got kind of the same sentiment, so I plan on doing that one plus a Dr one I just bought as soon as I get my spoilboard straightened out.
Hope you don't mind me showing pic of Angel-Doctor.
3DWAV ANGEL DOCTOR.jpg
The front line people deserve all the respect we can give them!
Well done!!
scott
scott

User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Put a rope around this virus

Post by rtibbs »

Not at all Scott. I look forward to seeing your Angel Doctor.
Another penny for scaling I assume

Ron

User avatar
scottp55
Vectric Wizard
Posts: 3693
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Put a rope around this virus

Post by scottp55 »

Most likely Ron :)
BUT not sure I can find an appropriate branch:)
May go dimensioned wood...haven't even done a prelim yet.
I LIKED that other one you did also, but this one with the rope border I like better.
Size on this one(and bit radius also)?
scott
scott

User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Put a rope around this virus

Post by rtibbs »

scottp55 wrote:
Sun Apr 05, 2020 4:51 pm

I LIKED that other one you did also, but this one with the rope border I like better.
Size on this one(and bit radius also)?
scott
5.5 x 7.5 oval
I increased the shape height on this one to .550 where the original was .375
.25EM clearance with a 1/64R 6.2 TBN for finish. Finish cut took 6 Hours, ugh

User avatar
mtylerfl
Vectric Wizard
Posts: 4682
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Put a rope around this virus

Post by mtylerfl »

That looks great, Ron!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

BigC
Vectric Wizard
Posts: 389
Joined: Tue Apr 02, 2019 7:06 pm
Model of CNC Machine: Workbee

Re: Put a rope around this virus

Post by BigC »

Just asking, what's the process for removing the old text to leave the surface for the new? please.
Regards
C

User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Put a rope around this virus

Post by rtibbs »

BigC wrote:
Mon Apr 06, 2020 5:07 am
Just asking, what's the process for removing the old text to leave the surface for the new? please.
Regards
C
C,
The process is very easy. Michael, the OP on the original post was kind enough to post a link for his model w/o text.
For some reason when I posted the link here it did not work so go to the original thread under active topics We will do this. The link from there works

BigC
Vectric Wizard
Posts: 389
Joined: Tue Apr 02, 2019 7:06 pm
Model of CNC Machine: Workbee

Re: Put a rope around this virus

Post by BigC »

rtibbs2018 wrote:
Mon Apr 06, 2020 11:48 am
BigC wrote:
Mon Apr 06, 2020 5:07 am
Just asking, what's the process for removing the old text to leave the surface for the new? please.
Regards
C
C,
The process is very easy. Michael, the OP on the original post was kind enough to post a link for his model w/o text.
For some reason when I posted the link here it did not work so go to the original thread under active topics We will do this. The link from there works
Excellent, Thank You
Great job btw, the border just adds that little finishing touch
Regards
C

RebeccaJ
Vectric Staff
Posts: 246
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: Put a rope around this virus

Post by RebeccaJ »

Ah this is Excellent RT! Thanks for sharing this :) It's really nice to see the joint hope we feel across the world!
Stay safe and very well done :)
Beki Jeremy
Senior Application Engineer - Vectric Ltd.

User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Put a rope around this virus

Post by rtibbs »

RebeccaJ wrote:
Thu Apr 09, 2020 11:29 am
Ah this is Excellent RT! Thanks for sharing this :) It's really nice to see the joint hope we feel across the world!
Stay safe and very well done :)
The thanks should go to Michael for providing his original model. I just added a couple of my own embellishments to it.

Thanks,
Ron

Post Reply