Nativity Scene (from scroll saw pattern)

This is the place to post images of work produced using Aspire
Post Reply
User avatar
Pickled06
Posts: 11
Joined: Fri Sep 06, 2019 6:51 pm
Model of CNC Machine: Avid CNC / CNC Router Parts PRO4848

Nativity Scene (from scroll saw pattern)

Post by Pickled06 »

So on the last day of Christmas, my true love received from me...

Here's a Nativity Scene that I saw on a scroll saw forum and wanted to make one of my own using a cnc. The original scene did not have the three wisemen, so I changed the shepherds' poses and made my own. I could have used a round over tool on my cnc, but I haven't mastered the 2 sided job and placing an index pin, so I used a handheld router to round over the edges. Maybe next Christmas :)

Hope you enjoy these as much as I enjoyed drawing and cutting them out

Stock: 1" unfinished red oak tread
Tool: 1/4" downcut end mill
Attachments
Making sure everything fits on the stock
Making sure everything fits on the stock
Cutting out the inner pieces
Cutting out the inner pieces
Scene
Scene
Carlo

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Nativity Scene (from scroll saw pattern)

Post by mtylerfl »

Fantastic, Carlo! I really like that!!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Holzarbeiter
Vectric Wizard
Posts: 409
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: Nativity Scene (from scroll saw pattern)

Post by Holzarbeiter »

Wow, Carlo, that looks outstanding. Very nice job!
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

User avatar
Pickled06
Posts: 11
Joined: Fri Sep 06, 2019 6:51 pm
Model of CNC Machine: Avid CNC / CNC Router Parts PRO4848

Re: Nativity Scene (from scroll saw pattern)

Post by Pickled06 »

mtylerfl wrote:Fantastic, Carlo! I really like that!!

Thank you Michael!
Carlo

User avatar
Pickled06
Posts: 11
Joined: Fri Sep 06, 2019 6:51 pm
Model of CNC Machine: Avid CNC / CNC Router Parts PRO4848

Re: Nativity Scene (from scroll saw pattern)

Post by Pickled06 »

Holzarbeiter wrote:Wow, Carlo, that looks outstanding. Very nice job!
Thank you Joe!
Carlo

vip-klaus
Vectric Apprentice
Posts: 57
Joined: Sat Jan 12, 2013 1:01 pm
Model of CNC Machine: Wabeco F1410 LF-C HS; Sorotec AL1110
Location: Wurmberg, Germany

Re: Nativity Scene (from scroll saw pattern)

Post by vip-klaus »

Absolutely great.

@ Pickled06: Would it be possible to get the drawing template or is it copyrighted material?

Klaus

RebeccaJ
Vectric Staff
Posts: 338
Joined: Fri Jun 01, 2012 1:30 pm
Model of CNC Machine: Various
Location: Redditch, UK
Contact:

Re: Nativity Scene (from scroll saw pattern)

Post by RebeccaJ »

Very nice Carlo!
Beki
Senior Application Engineer - Vectric Ltd.

User avatar
Phil
Vectric Wizard
Posts: 3025
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: Nativity Scene (from scroll saw pattern)

Post by Phil »

Very nice. Can you point us to the scroll saw website?

Thanks, Phil :)

Post Reply