Recent Christmas Stuff
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Recent Christmas Stuff
I'm busy getting my Christmas stuff completed. Here's a couple of new ones.
I made several of the Tic-Tac-Toe. They're made with 0.75" Poplar and painted with rattle can. I forgot how popular this game is with kids about 6-8 years.
I made several of the Tic-Tac-Toe. They're made with 0.75" Poplar and painted with rattle can. I forgot how popular this game is with kids about 6-8 years.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Recent Christmas Stuff
Nice work Gerry.
I haven't even thought about Christmas
I haven't even thought about Christmas
John
Maker of Chips
Maker of Chips
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Mar 27, 2013 4:16 pm
- Model of CNC Machine: CNC Shark Pro Plus
- Contact:
Re: Recent Christmas Stuff
Looks really good! Have to start cranking some out soon. Thanks for posting.
BillK
https://www.facebook.com/CarvingsByKurtz
https://www.facebook.com/CarvingsByKurtz
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Recent Christmas Stuff
Very nice work Gerry!
Really like that scroll!!
scott
Really like that scroll!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Recent Christmas Stuff
That's one of the reasons we got it. Marsha was looking over my shoulder and ...aaaahhhhh, "You need to make a couple of those for the boys". So, I made one for each of my son's families. The hack was a great price.scottp55 wrote:Very nice work Gerry!
Really like that scroll!!
scott
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Recent Christmas Stuff
Me thinks you are living dangerously with the placement of moms peg....just saying!
Very nice work.
Very nice work.
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Recent Christmas Stuff
yup.... I'm always giving my DIL a hard time, which she gives me back in spades ...Holzarbeiter wrote:Me thinks you are living dangerously with the placement of moms peg....just saying!
Very nice work.
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: Recent Christmas Stuff
Excellent Stuff! Thanks for sharing
You are well ahead of me, I need to get a move on! Santa, please may I have more time!!
You are well ahead of me, I need to get a move on! Santa, please may I have more time!!
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.
- Todd Bailey
- Vectric Staff
- Posts: 622
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Recent Christmas Stuff
Hey gkas...
Thanks so much for posting those pictures of finished pieces you made! Love the Santa's scroll... and thank you for the support!!!!
My Daughter asked where ours was last week and said that it has become one of her most loved Christmas traditions... messing around with the family naughty and nice list! Can't wait to get it out!!!
Thanks again!
Thanks so much for posting those pictures of finished pieces you made! Love the Santa's scroll... and thank you for the support!!!!
My Daughter asked where ours was last week and said that it has become one of her most loved Christmas traditions... messing around with the family naughty and nice list! Can't wait to get it out!!!
Thanks again!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
Re: Recent Christmas Stuff
Hack of the week turned out well buddy
I was thinking about purchasing that one alongside a few others from D&M
That has just confirmed it.
Have you got any milling stats and tooling on that one and what fonts used
Great job
Regards
C
I was thinking about purchasing that one alongside a few others from D&M
That has just confirmed it.
Have you got any milling stats and tooling on that one and what fonts used
Great job
Regards
C
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Recent Christmas Stuff
The Santa's List font is English Towne, Naughty/Nice is Calistro MT, and Name List is Lucida Calligraphy. All Vcarve is with 60° bit. Roughing is a 0.25 end mill and Finish is 1/16" Tapered Ball Nose bit.BigC wrote:Hack of the week turned out well buddy
I was thinking about purchasing that one alongside a few others from D&M
That has just confirmed it.
Have you got any milling stats and tooling on that one and what fonts used
Great job
Regards
C
Can't post the carve file... D&M models included.
Re: Recent Christmas Stuff
Thank you for your detailed reply. It really does look the BIZ (I'm impressed by that)gkas wrote:The Santa's List font is English Towne, Naughty/Nice is Calistro MT, and Name List is Lucida Calligraphy. All Vcarve is with 60° bit. Roughing is a 0.25 end mill and Finish is 1/16" Tapered Ball Nose bit.BigC wrote:Hack of the week turned out well buddy
I was thinking about purchasing that one alongside a few others from D&M
That has just confirmed it.
Have you got any milling stats and tooling on that one and what fonts used
Great job
Regards
C
Can't post the carve file... D&M models included.
Regards
C
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: Recent Christmas Stuff
What size is the plaque width, length and thickness and do you remember how long it took to cut? I would like to cut a few. I really like how yours turned out.
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Recent Christmas Stuff
The plaque dimensions are about 8"x10" carved with 3/4" Poplar. Toolpath summary say 3 hours, which is probably pretty close.MarkJohnston wrote:What size is the plaque width, length and thickness and do you remember how long it took to cut? I would like to cut a few. I really like how yours turned out.
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: Recent Christmas Stuff
Thanks for the details. Now to find time to do it.
Looks like a really nice gift.
Mark
Looks like a really nice gift.
Mark