Catch All / Organization Tray

This is the place to post images of work produced using Aspire
Post Reply
User avatar
Pickled06
Posts: 11
Joined: Fri Sep 06, 2019 6:51 pm
Model of CNC Machine: Avid CNC / CNC Router Parts PRO4848

Catch All / Organization Tray

Post by Pickled06 »

I wanted to start learning how to model things and learn how to use/manipulate the "zero plane." I also wanted something to help me keep the daily things in my pocket in one place. Here's a catch all / organization tray that I designed - my wife uses it daily...time to make another one :)
Attachments
3/4" cedar from the local big box store carved into a catch all / organization tray
3/4" cedar from the local big box store carved into a catch all / organization tray
Carlo

User avatar
Pickled06
Posts: 11
Joined: Fri Sep 06, 2019 6:51 pm
Model of CNC Machine: Avid CNC / CNC Router Parts PRO4848

Re: Catch All / Organization Tray

Post by Pickled06 »

After we posted the catch all / organization tray on our facebook page, I received a message asking me to make a personalized gift.

Here's another catch all / organization tray. The husband is currently in flight school and the wife thinks about jewelry.
Attachments
Catch all /organization tray made from 3/4" hickory.  Client provided a stick diagram and this is what I came up with.
Catch all /organization tray made from 3/4" hickory. Client provided a stick diagram and this is what I came up with.
67062275_1312968612209706_1482817418626596864_n.jpg (10.55 KiB) Viewed 149 times
Carlo

mark-s
Vectric Apprentice
Posts: 208
Joined: Sat Feb 03, 2018 2:03 am
Model of CNC Machine: diy 4 X 4 CNC Router
Location: So. Cal.

Re: Catch All / Organization Tray

Post by mark-s »

Nice, like it alot, good job.
mark-s

User avatar
WNC_Ed
Vectric Craftsman
Posts: 266
Joined: Fri Dec 07, 2018 5:56 pm
Model of CNC Machine: Shark HD4 AXYZ 4010
Location: Western North Carolina - Heart of the Smokies

Re: Catch All / Organization Tray

Post by WNC_Ed »

Very nice!
"Still applicable" - how funny.
Congrats!
Maker of sawdust

User avatar
scottp55
Vectric Wizard
Posts: 3681
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Catch All / Organization Tray

Post by scottp55 »

LIKE both of them!!
scott
scott

Post Reply