V-Carve inlay on Cutting Board

This is the place to post images of work produced using Aspire
Post Reply
Napier Boys High
Vectric Apprentice
Posts: 7
Joined: Tue May 07, 2019 8:05 am
Model of CNC Machine: ross 120/120
Location: Napier New Zealand

V-Carve inlay on Cutting Board

Post by Napier Boys High »

I am really enjoying the V-Carve inlay technique. This was a trial which worked well using Imbuia on a cheap bamboo cutting board.
Attachments
V-Carve inlay
V-Carve inlay

User avatar
scottp55
Vectric Wizard
Posts: 3736
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: V-Carve inlay on Cutting Board

Post by scottp55 »

NICELY done!! :) :)
scott
"Go not where the path may lead;
Go instead where there is no path, and leave a Trail"
RWE

Napier Boys High
Vectric Apprentice
Posts: 7
Joined: Tue May 07, 2019 8:05 am
Model of CNC Machine: ross 120/120
Location: Napier New Zealand

Re: V-Carve inlay on Cutting Board

Post by Napier Boys High »

Apologies for the upside-down picture, I will try to upload another one.

User avatar
scottp55
Vectric Wizard
Posts: 3736
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: V-Carve inlay on Cutting Board

Post by scottp55 »

It displays correctly when clicked.
"Go not where the path may lead;
Go instead where there is no path, and leave a Trail"
RWE

Post Reply