Page 1 of 1

Alum panels

Posted: Thu Jul 04, 2019 4:46 pm
by WNC_Ed
My first swing at cutting alum.
Pretty thin sheet stock at .045 but that seemed like a good "starting stock".
These are for a project at work.
Panels are roughly 10.75" x 2.75"

Re: Alum panels

Posted: Sun Jul 07, 2019 3:06 pm
by Creation in Wood
Turned out good

Re: Alum panels

Posted: Sun Jul 07, 2019 3:40 pm
by scottp55
Congrats Ed!! :)
scott