American Flag / Navy

This is the place to post images of work produced using Aspire
Post Reply
User avatar
Creation in Wood
Vectric Wizard
Posts: 487
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick CNC 4x8
Location: Monument, Colorado USA

American Flag / Navy

Post by Creation in Wood »

American Flag Navy 2_edited-1.jpg
Made this flag for my daughter and her husband how net in the navy.

Wood Cherry
Size 22" x 17"
Finish Conversion Varnish
Software Aspire 9.517V
Flag D&M
Navy Emblem I created
Thank You
Doug

User avatar
highpockets
Vectric Wizard
Posts: 2959
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: American Flag / Navy

Post by highpockets »

WOW!!! Beautiful work Doug...

Thanks for sharing....
John
Maker of Chips

Savannahdan
Vectric Wizard
Posts: 395
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: American Flag / Navy

Post by Savannahdan »

Love it! I notice you signed it in the lower part of the banner.

User avatar
scottp55
Vectric Wizard
Posts: 3588
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: American Flag / Navy

Post by scottp55 »

WELL done Sir!!
Cherry face grain can argue with you sometimes in 3D...NOT in YOURS! :)
Superb finish! What was final grit? # of coats required?
WELL done!!
scott
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

User avatar
Creation in Wood
Vectric Wizard
Posts: 487
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick CNC 4x8
Location: Monument, Colorado USA

Re: American Flag / Navy

Post by Creation in Wood »

Scott
I sanded it to 150 grit and applied two coats of Conversion Varnish
Thank You
Doug

User avatar
Creation in Wood
Vectric Wizard
Posts: 487
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick CNC 4x8
Location: Monument, Colorado USA

Re: American Flag / Navy

Post by Creation in Wood »

I sign all of my work
Thank You
Doug

User avatar
scottp55
Vectric Wizard
Posts: 3588
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: American Flag / Navy

Post by scottp55 »

Thank you Doug!
scott
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

Post Reply