Any finished 3d rotary projects?
- jaru-eri
- Vectric Craftsman
- Posts: 189
- Joined: Fri Feb 06, 2009 3:11 am
- Model of CNC Machine: Taig and router, Gecko G540, Mach3
- Location: Norway
Any finished 3d rotary projects?
Are there anybody who have made a full 3D figure with rotary table?
- TReischl
- Vectric Wizard
- Posts: 4596
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Any finished 3d rotary projects?
Yes. You might want to try searching in the Gallery section.
"If you see a good fight, get in it." Dr. Vernon Johns
- SteveNelson46
- Vectric Wizard
- Posts: 2282
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: Any finished 3d rotary projects?
My take on the gavel and pad Steve!
Mike
Black walnut on the gavel, pine on the pad...
Mike
- WNC_Ed
- Vectric Craftsman
- Posts: 296
- Joined: Fri Dec 07, 2018 5:56 pm
- Model of CNC Machine: Shark HD4 AXYZ 4010
- Location: Western North Carolina - Heart of the Smokies
Re: Any finished 3d rotary projects?
Mike,
The gavel is awesome.
The pad is brilliant!
Love it
Congrats
The gavel is awesome.
The pad is brilliant!
Love it
Congrats
Maker of sawdust
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: Any finished 3d rotary projects?
Thank you! I will PM you for your location! I am sooooo missing NC right about now with snowbanks 12' high in front of my driveway...
- WNC_Ed
- Vectric Craftsman
- Posts: 296
- Joined: Fri Dec 07, 2018 5:56 pm
- Model of CNC Machine: Shark HD4 AXYZ 4010
- Location: Western North Carolina - Heart of the Smokies
Re: Any finished 3d rotary projects?
Mike,
come on down, but bring your rubber boots ... it's wet here.
come on down, but bring your rubber boots ... it's wet here.
Maker of sawdust
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Any finished 3d rotary projects?
with snowbanks 12' high in front of my driveway...
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: Any finished 3d rotary projects?
WOWRcnewcomb wrote:with snowbanks 12' high in front of my driveway...
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.
-
- Vectric Wizard
- Posts: 970
- Joined: Tue Mar 20, 2007 6:29 am
- Model of CNC Machine: ShopBot prt with 4g upgrade
- Location: Visalia, Ca
Re: Any finished 3d rotary projects?
San Jose 12' of snow
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Any finished 3d rotary projects?
The photo was from a friend's house in Austin, Minnesota.San Jose 12' of snow
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop