Mini Santa Face

This is the place to post images of work produced using Aspire
Post Reply
mark-s
Vectric Apprentice
Posts: 211
Joined: Sat Feb 03, 2018 2:03 am
Model of CNC Machine: diy 4 X 4 CNC Router
Location: So. Cal.

Mini Santa Face

Post by mark-s »

3 inch Maple, clear matte finish.
Maple carves so good.
mark-s
CNC SANTA FACE 2.jpg

michiganbill
Posts: 17
Joined: Wed Feb 29, 2012 4:04 pm
Model of CNC Machine: FLA300

Re: Mini Santa Face

Post by michiganbill »

Beautiful, is this from the clip art included with Vectric products or other (looks deeper than my rendering)
Ho, Ho, Ho

User avatar
scottp55
Vectric Wizard
Posts: 3749
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Mini Santa Face

Post by scottp55 »

Good eye detail, and good mouth shape and depth....Another good one Mark! :D
"Go not where the path may lead;
Go instead where there is no path, and leave a Trail"
RWE

mark-s
Vectric Apprentice
Posts: 211
Joined: Sat Feb 03, 2018 2:03 am
Model of CNC Machine: diy 4 X 4 CNC Router
Location: So. Cal.

Re: Mini Santa Face

Post by mark-s »

michiganbill it is from the clip art, I go about 12.7 deep with a .5 R ball nose bit.
The material is 13.88 thick maple from old cabinet doors.

Scott thank you.

mark-s

Royrufus
Posts: 11
Joined: Thu Nov 29, 2018 3:46 am
Model of CNC Machine: Carve King

Re: Mini Santa Face

Post by Royrufus »

Looks very nice. Like that you recycled the wood.

User avatar
Creation in Wood
Vectric Wizard
Posts: 524
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick 2020 4x8 CNC
Location: Monument, Colorado USA

Re: Mini Santa Face

Post by Creation in Wood »

Looks good
Thank You
Doug

Post Reply