Malteese Cross Clock
-
- Posts: 10
- Joined: Mon Jun 16, 2014 2:50 am
- Model of CNC Machine: Camaster Stinger II
- Location: Siloam Springs, AR
Malteese Cross Clock
Finally freed up my CNC long enough to make the piece that inspired me to buy it in the first place. I have made about 10 of these. The first 9 were made using only a bandsaw and jigsaw. One day to cut them out and six days of hand rasping and sanding just to get them ready for finish. Designed it in Aspire and cut out on my CNC and in less than a day it was ready for finish. This one was presented as a retirement gift for the Asst. Chief of a neighboring department.
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Malteese Cross Clock
Very Nice. Should be very well received. Really like the graphics around the edges Are those hand painted or decals?
Thanks for sharing.
Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
Re: Malteese Cross Clock
Is that maybe West Siloam Springs FD?
Ken Zey
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Malteese Cross Clock
Very impressive! Excellent work.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: Malteese Cross Clock
Beautiful clock. Personalized inserts really make it special.
- SteveNelson46
- Vectric Wizard
- Posts: 2304
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
-
- Posts: 10
- Joined: Mon Jun 16, 2014 2:50 am
- Model of CNC Machine: Camaster Stinger II
- Location: Siloam Springs, AR
Re: Malteese Cross Clock
The graphics around the edges are 3D scrapbook pieces. Sadly they have been discontinued so after I use the ones I have left, I'll have to design something else.dwilli9013 wrote:Very Nice. Should be very well received. Really like the graphics around the edges Are those hand painted or decals?
Thanks for sharing.
-
- Posts: 10
- Joined: Mon Jun 16, 2014 2:50 am
- Model of CNC Machine: Camaster Stinger II
- Location: Siloam Springs, AR
Re: Malteese Cross Clock
That is indeed the West Siloam Springs FD. I was also a member of that department for over 10 years and have worked for the Siloam Springs FD for almost 20.kzeyus wrote:Is that maybe West Siloam Springs FD?
Re: Malteese Cross Clock
I'm with Piney Point on the opposite side of the county
Ken Zey
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
Re: Malteese Cross Clock
Rogers fireman here. Finally see someone close to me doing this also. Cool!
-
- Posts: 10
- Joined: Mon Jun 16, 2014 2:50 am
- Model of CNC Machine: Camaster Stinger II
- Location: Siloam Springs, AR
Re: Malteese Cross Clock
My son-in-law is a Rogers firefighter.
Re: Malteese Cross Clock
just curious what his first name is if you dont mind me asking? Thanks
-
- Posts: 10
- Joined: Mon Jun 16, 2014 2:50 am
- Model of CNC Machine: Camaster Stinger II
- Location: Siloam Springs, AR
Re: Malteese Cross Clock
His first name is Cody. He's been there a little over a year now.