How about a musical Paradise Box?
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
How about a musical Paradise Box?
On my website is the statement "There really is no limit to what can be done with Michael Tyler's original box design.". I've been trying, and have not found the limit yet. This one is a little beyond ordinary though. I call it a tribute to Michael Tyler and his venerable box design.
It is the full size box, except that height has been reduced to 3-3/4" and the wood is 3/8" thick for the side panels, 1/4" thick for the front, rear, and bottom panels, and 1/8" thick for the top panel. The top panel is box elder, all other panels are curly spalted maple. The fret board, nut, bridge, bottom panel stripes, and tail piece is padauk. There is a US silver dollar inlaid into the fret board. Grover brand tuners. The bottom panel is removable with brass flat head screws. The wicker weave is a 2x2 model that I created, and so is the chair cane weave.
There is some natural red streaking in the box elder top panel (but I assure you that it is not my blood spatter from learning to play this thing). It does sound pretty good, though spalted maple may have sounded a little better.
CarveOne
It is the full size box, except that height has been reduced to 3-3/4" and the wood is 3/8" thick for the side panels, 1/4" thick for the front, rear, and bottom panels, and 1/8" thick for the top panel. The top panel is box elder, all other panels are curly spalted maple. The fret board, nut, bridge, bottom panel stripes, and tail piece is padauk. There is a US silver dollar inlaid into the fret board. Grover brand tuners. The bottom panel is removable with brass flat head screws. The wicker weave is a 2x2 model that I created, and so is the chair cane weave.
There is some natural red streaking in the box elder top panel (but I assure you that it is not my blood spatter from learning to play this thing). It does sound pretty good, though spalted maple may have sounded a little better.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: How about a musical Paradise Box?
OK CarveOne.....I'm Impressed!
What's that white stuff on the ground:)
scott
What's that white stuff on the ground:)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: How about a musical Paradise Box?
I think it was something called "snow" that was deposited by a passing artic vortex last Saturday. Has been too cold for it to do much melting. It makes a nice photo background though.
CarveOne
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: How about a musical Paradise Box?
Funny:)
The wind is howling up here, but it's raining...and will be for 2 days:)
Only 2" on ground and that will disappear by morning:)
I really like your "Michael Box" guitar
scott
The wind is howling up here, but it's raining...and will be for 2 days:)
Only 2" on ground and that will disappear by morning:)
I really like your "Michael Box" guitar
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: How about a musical Paradise Box?
I've said it before I've been making Michael's paradise box with many different themes for quite a few years but Carveone has taken it to another level.
Really nice!!!
Mark
Really nice!!!
Mark
- mtylerfl
- Vectric Archimage
- Posts: 5895
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: How about a musical Paradise Box?
Oh my goodness - what a great imagination, Richard! I never would have thought to incorporate the Paradise Box into a musical instrument. Another fantastic variation. Great job!!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: How about a musical Paradise Box?
Agreed very nice & next level. Also a very fitting tribute to Michael T. Not only does the Paradise box hold sweet memories now it also plays sweet music.
Thanks for sharing it with us all.
Thanks for sharing it with us all.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: How about a musical Paradise Box?
Thank you very much Mark. I have enjoyed building them for family and friends. Too many made to remember just how many.MarkJohnston wrote:I've said it before I've been making Michael's paradise box with many different themes for quite a few years but Carveone has taken it to another level.
Really nice!!!
Mark
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: How about a musical Paradise Box?
I can't begin to match how many projects that you dream up for your Carvewright website and for the Vectric users each month. The Paradise Box project really has been a good one for me, and I wanted to bring a big smile to your face with this tribute to your works. Thank you very much for all you do for the cnc woodworking community sir.mtylerfl wrote:Oh my goodness - what a great imagination, Richard! I never would have thought to incorporate the Paradise Box into a musical instrument. Another fantastic variation. Great job!!
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- martin54
- Vectric Archimage
- Posts: 7352
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: How about a musical Paradise Box?
Well that wasn't quite what I was expecting from the title but I guess I should have known coming from you it would be box guitar based
Great job love it
I can't begin to match how many projects that you dream up for your Carvewright website and for the Vectric users each month. The Paradise Box project really has been a good one for me, and I wanted to bring a big smile to your face with this tribute to your works. Thank you very much for all you do for the cnc woodworking community sir.
+ 1 to that
Great job love it
I can't begin to match how many projects that you dream up for your Carvewright website and for the Vectric users each month. The Paradise Box project really has been a good one for me, and I wanted to bring a big smile to your face with this tribute to your works. Thank you very much for all you do for the cnc woodworking community sir.
+ 1 to that
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: How about a musical Paradise Box?
Yes Martin, that was an intentional trick title. Just for effect.
There is no reason that a chime mechanism can't be installed in one of the boxes though.
CarveOne
There is no reason that a chime mechanism can't be installed in one of the boxes though.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- martin54
- Vectric Archimage
- Posts: 7352
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: How about a musical Paradise Box?
Well it worked Mind you fooling me is not much of an achievement reallyCarveOne wrote:Yes Martin, that was an intentional trick title. Just for effect.
There is no reason that a chime mechanism can't be installed in one of the boxes though.
CarveOne
Yes I agree, very simple job to install a chime mechanism in one
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: How about a musical Paradise Box?
I have a request from a close friend to turn one of the Paradise Box designs I have done into a cremation urn for his recently deceased wife. She liked my boxes and I had not made one for her so far. As with this guitar, the top panel will be glued on, and the bottom panel will be removable. It will have the 2x2 wicker weave on it. He has lymph node cancer, and her Paradise Box will be buried with him when he passes on.
Saying yes to making yet another box was very easy in this case.
CarveOne
Saying yes to making yet another box was very easy in this case.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Craftsman
- Posts: 128
- Joined: Tue Apr 24, 2012 7:01 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Jacksonville. Florida
Re: How about a musical Paradise Box?
looks good as always
here is my first, I have a lot of work to work up to your lever soon
here is my first, I have a lot of work to work up to your lever soon
Dana Decker
Aspire 8 something
CaMaster Stinger I
Aspire 8 something
CaMaster Stinger I
- mtylerfl
- Vectric Archimage
- Posts: 5895
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: How about a musical Paradise Box?
I like that Altoid one, too! Very portable!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC