did this lasered style wren house for kids to easily assemble (used aspire 8.5 for the files)
bird house
Re: lasered wren styled bird house
Posted: Sun Aug 14, 2016 8:00 pm
by stankern
Because this was a vector diagram I re-sized the diagram by 150% ,and re-sized the slots
The tabs turned out to be 3/16 too long but the radial arm saw fixed that quick
If I spent the time and re-sized everything on the diagram then it would be a perfect fit like the original
But I did not want this to go on and on
This was an exercise of a quick bird house for kids to assemble
Re: lasered wren styled bird house
Posted: Sun Aug 14, 2016 8:57 pm
by stankern
the second cut
Re: lasered wren styled bird house
Posted: Mon Sep 05, 2016 12:54 pm
by spyderxxx
Stan
Where did you find the plan? Would love to build this.
Ed
Re: lasered wren styled bird house
Posted: Sat Sep 17, 2016 3:22 am
by jwoodworke@aol.com
Love this design! My homebrew CNC Router is almost online, and I m intending to run Vectric's 2D Cam package. I noticed you have Aspire. I should be able to execute this design (or something similar) with 2D, right?
Re: lasered wren styled bird house
Posted: Sat Sep 17, 2016 10:38 am
by martin54
spyderxxx wrote:Stan
Where did you find the plan? Would love to build this.
Ed
Don't know where this particular plan came from but there are quite a few different styles on makecnc.com if you search for bird house
It would be pretty easy to draw your own version as well
Re: lasered wren styled bird house
Posted: Sat Sep 17, 2016 10:40 am
by martin54
jwoodworke@aol.com wrote:Love this design! My homebrew CNC Router is almost online, and I m intending to run Vectric's 2D Cam package. I noticed you have Aspire. I should be able to execute this design (or something similar) with 2D, right?
Looking at it I can't see anything that would require anything more than simple pocket & profile cutting so yes cut2d would be suitable for a job like this
