did this lasered style wren house for kids to easily assemble (used aspire 8.5 for the files)
bird house
lasered wren styled bird house
Re: lasered wren styled bird house
Because this was a vector diagram I re-sized the diagram by 150% ,and re-sized the slots
The tabs turned out to be 3/16 too long but the radial arm saw fixed that quick
If I spent the time and re-sized everything on the diagram then it would be a perfect fit like the original
But I did not want this to go on and on
This was an exercise of a quick bird house for kids to assemble
The tabs turned out to be 3/16 too long but the radial arm saw fixed that quick
If I spent the time and re-sized everything on the diagram then it would be a perfect fit like the original
But I did not want this to go on and on
This was an exercise of a quick bird house for kids to assemble
-
- Vectric Craftsman
- Posts: 102
- Joined: Sat Oct 06, 2012 11:51 am
- Model of CNC Machine: my own design
- Location: Cambridge Ontario
Re: lasered wren styled bird house
Stan
Where did you find the plan? Would love to build this.
Ed
Where did you find the plan? Would love to build this.
Ed
-
- Posts: 5
- Joined: Wed Nov 04, 2015 1:47 am
- Model of CNC Machine: DIY CNC router running Cut2D v9.0
Re: lasered wren styled bird house
Love this design! My homebrew CNC Router is almost online, and I m intending to run Vectric's 2D Cam package. I noticed you have Aspire. I should be able to execute this design (or something similar) with 2D, right?
- martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: lasered wren styled bird house
Don't know where this particular plan came from but there are quite a few different styles on makecnc.com if you search for bird housespyderxxx wrote:Stan
Where did you find the plan? Would love to build this.
Ed
It would be pretty easy to draw your own version as well
- martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: lasered wren styled bird house
Looking at it I can't see anything that would require anything more than simple pocket & profile cutting so yes cut2d would be suitable for a job like thisjwoodworke@aol.com wrote:Love this design! My homebrew CNC Router is almost online, and I m intending to run Vectric's 2D Cam package. I noticed you have Aspire. I should be able to execute this design (or something similar) with 2D, right?