Small Birthday plaque

This is the place to post images of work produced using Aspire
Post Reply
basecircle
Vectric Apprentice
Posts: 66
Joined: Mon Apr 18, 2011 10:39 pm
Model of CNC Machine: shark pro

Small Birthday plaque

Post by basecircle »

Hi everbody .This is no big deal.It's a pine Birthday plaque for my Grand daughter.I put a small frame around it. Just used a 60deg cutter cut to a depth of .060 Pre sprayed a sealer on and then cut.Shot some black ink. sanded it and cleared it.She loves it. Basecircle
Attachments
IMAG0017.jpg
IMAG0019.jpg

User avatar
highpockets
Vectric Wizard
Posts: 2853
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Small Birthday plaque

Post by highpockets »

Great job! Neat that you created the sign and frame all in one.

Did you seal, cut then seal again before spraying the ink on?
John
Maker of Chips

basecircle
Vectric Apprentice
Posts: 66
Joined: Mon Apr 18, 2011 10:39 pm
Model of CNC Machine: shark pro

Re: Small Birthday plaque

Post by basecircle »

Thanks High pockets. To answer your question I sealed cut and sprayed on the Ink. After cleanup I sprayed.The first sealer is to close the grain and when you ink it.there is no bleed. Hope this answered your question. Basecircle

User avatar
highpockets
Vectric Wizard
Posts: 2853
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Small Birthday plaque

Post by highpockets »

basecircle,

Thanks it does. What are you using to seal the wood?
John
Maker of Chips

User avatar
martin54
Vectric Wizard
Posts: 4735
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber System 48 (modified)
Location: Crossgates, Scotland

Re: Small Birthday plaque

Post by martin54 »

This is no big deal.It's a pine Birthday plaque for my Grand daughter

Now I would have to disagree with that, the fact that it was done for your Grand daughter & she loved it makes it a big deal, doesn't have to be something really elaborate to be a big deal as far as I am concerned, sometimes the simplest of things are the best :lol: :lol:

Anyway, great job in making your Grand daughters birthday extra special

basecircle
Vectric Apprentice
Posts: 66
Joined: Mon Apr 18, 2011 10:39 pm
Model of CNC Machine: shark pro

Re: Small Birthday plaque

Post by basecircle »

Thank you Highpockets.I used spray on clear.Sometimes I use the spray shellack . Try it You will like it. Basecircle

basecircle
Vectric Apprentice
Posts: 66
Joined: Mon Apr 18, 2011 10:39 pm
Model of CNC Machine: shark pro

Re: Small Birthday plaque

Post by basecircle »

Thanks Martin She loves it and that's what matters.I only meant that for this Fourm It was not a big deal.Cause alot of the work I see has many hours. Anyway Than k you.And keep cranking the work out. Basecircle

User avatar
BArnold
Vectric Craftsman
Posts: 187
Joined: Sat May 02, 2015 12:20 am
Model of CNC Machine: SO2/XCarve hybrid w/NEMA23 on all axes
Location: Thomasville, GA, USA

Re: Small Birthday plaque

Post by BArnold »

Nice idea and execution!

You give me some ideas for plaques I need to make for some of my grandkids.

Post Reply