Coat of Arms,

This is the place to post images of work produced using Aspire
Post Reply
User avatar
mezalick
Vectric Wizard
Posts: 2603
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Coat of Arms,

Post by mezalick »

Just finished cutting,,,,no finish work yet ( sanding , staining, etc.)

Michael
Attachments
COA-2.jpg
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

User avatar
esteeme1
Vectric Wizard
Posts: 2130
Joined: Tue Nov 02, 2010 3:26 pm
Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
Location: Chesapeake VA
Contact:

Re: Coat of Arms,

Post by esteeme1 »

Very nice Michael, The depth and detailing are fantastic unfortunate that the rays from the Quarter sawn are lost in the carving.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/

User avatar
Makingtoothpicks
Vectric Apprentice
Posts: 506
Joined: Tue Jul 23, 2013 8:46 pm
Model of CNC Machine: Cncrouterparts CPR2448
Location: Burien, Wa
Contact:

Re: Coat of Arms,

Post by Makingtoothpicks »

May I ask what size this is.
You have nice detail in the heads. What size bit did you use.

Thank You
Don

User avatar
mezalick
Vectric Wizard
Posts: 2603
Joined: Mon Nov 03, 2008 9:07 am
Model of CNC Machine: Camaster Cobra
Location: Philadelphia, PA USA
Contact:

Re: Coat of Arms,

Post by mezalick »

Don,
The size is 14" x 20" x 1.125"
The finish cut was with a 1/4" ball end with a 1/8" for some of the finer details
I got the models from Vector Art 3D...
I would like to say I did it all myself but I must give credit where credit is due....
I use their models as examples of the quality I want to produce...

Thanks
Michael Mezalick
https://carveddetails.com
mm@mezalick.com

Post Reply