King Neptune
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
King Neptune
A few years ago someone asked someone to model King Neptune. It was a model that I always wanted to do but just never had the time to get it done. I did make a quick and feeble attempt and still have the model but only as personal reference and growth indication. I don't have a project set up for this but will probably burn it on my laser and frame it. The only reason for that is the fact that my machine time is pretty full.
Anyway please enjoy I think this is probably one of my better models. FYI this was completely modeled with Aspire and no subprograms were used.
Anyway please enjoy I think this is probably one of my better models. FYI this was completely modeled with Aspire and no subprograms were used.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: King Neptune
And he even has a bellybutton
Great stuff.
Great stuff.
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
Re: King Neptune
Nice work Jim, figures and faces are just about the toughest thing to model IMHO.
I've enjoyed watching the development of your modeling skills through the posts of your completed work.
Make me want to get back to doing more modeling. Perhaps we'll do a bit more for Jim's camp this year
Regards,
James
I've enjoyed watching the development of your modeling skills through the posts of your completed work.
Make me want to get back to doing more modeling. Perhaps we'll do a bit more for Jim's camp this year
Regards,
James
Re: King Neptune
Excellent, your model is on par with some of the best I've seen including the ones that were modeled in clay and 3D scanned.
Phil
Phil
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: King Neptune
Wow, Jim. That is amazing. I did not realize that Neptune had such good abs .
Angie
Angie
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Re: King Neptune
Wow, Jim
You need to cut King Neptune on the CNC from wood. http://forum.vectric.com/posting.php?mo ... 29&t=24106#
You need to cut King Neptune on the CNC from wood. http://forum.vectric.com/posting.php?mo ... 29&t=24106#
Thank You
Doug
Doug
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: King Neptune
Thanks for all the comments. I must say that I don't get a chance to model things for personal use but I was motivated to use the Neptune face for a Lone Sailor model that I was requested to do. I didn't have a quality pic of the face so I decided to model the Neptune face and sub it for the Lone Sailor. I just couldn't stop there so decided to complete it. All said and done I have about 16 hours of work.
Here's a copy of the Lone Sailor.
Here's a copy of the Lone Sailor.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: King Neptune
Fantastic modeling skills.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: King Neptune
Wow! Thanks for all the props... and of course the interest. Here is a laser copy. Eventually I will get an order to carve this piece as I will push it off on someone(??????) But for now My Grandson will have a door plaque.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- mezalick
- Vectric Wizard
- Posts: 2980
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: King Neptune
Super Jim....!!
Will you be coming to the Aspire Camp ?
Would like to spend some time comparing notes.
Michael
Will you be coming to the Aspire Camp ?
Would like to spend some time comparing notes.
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: King Neptune
Thanks Michael,
I certainly had a great time at the last one I went to, and tried to make it last year but had to cancel. I'm not sure what my schedule will be like this year but I would definitely like to attend. My time management will have to improve before I can commit this year. I'm always available via phone. Number is on my site.
I certainly had a great time at the last one I went to, and tried to make it last year but had to cancel. I'm not sure what my schedule will be like this year but I would definitely like to attend. My time management will have to improve before I can commit this year. I'm always available via phone. Number is on my site.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: King Neptune
Hi Nick, Thanks, I have been known to help a few people with some modeling but don't have a a formal lesson plan. The vectric tutorials do provide a great starting point. If there is something you're trying to model I would be glad to help you.nicksilva wrote:excellent follow up. You should give lessons.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/