Vault Boy

This is the place to post images of work produced using Aspire
Post Reply
User avatar
Greasetattoo
Vectric Wizard
Posts: 854
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

Vault Boy

Post by Greasetattoo »

A couple plaques I made!
Enjoy!
Attachments
vault boy final.jpg
working paint white.jpg

User avatar
RoutnAbout
Vectric Wizard
Posts: 2085
Joined: Mon Sep 19, 2005 11:09 pm
Model of CNC Machine: 24x18 Desktop
Location: North Manchester, Indiana

Re: Vault Boy

Post by RoutnAbout »

Neat Stuff Grease,
Whats the material?
Good to see your still at it.!!
Roll of Honor <-- Never Forget
________
Don

User avatar
Greasetattoo
Vectric Wizard
Posts: 854
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

Re: Vault Boy

Post by Greasetattoo »

Just some plywood I had laying around..
My machine is always running!
Thanks for the kind comments!

User avatar
esteeme1
Vectric Wizard
Posts: 2132
Joined: Tue Nov 02, 2010 3:26 pm
Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
Location: Chesapeake VA
Contact:

Re: Vault Boy

Post by esteeme1 »

I've always been impressed with your creativity and that doesn't exclude your talent and craftsmanship.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/

Tundraman
Vectric Apprentice
Posts: 71
Joined: Wed Apr 08, 2015 2:37 am
Model of CNC Machine: Techno Isel 3'x4' Gantry III

Re: Vault Boy

Post by Tundraman »

Great job!
Had to google him to know what I was looking at. :lol:

Scott

BallardMillworks
Posts: 8
Joined: Tue Dec 01, 2015 8:26 am
Model of CNC Machine: Shopbot Buddy

Re: Vault Boy

Post by BallardMillworks »

Nice!

Post Reply