This one is for a "muscle car" themed patio at a restaurant about 25 miles from here.
Corafoam 15, acrylics & some leaded 1-Shot . Caplain Gold leaf , 19karat, with palladium instead of silver in the alloy
Since this is going on a billboard & some large site signs, the pictorial is a digital print. Thanks to Debb Bates from Fredericton for painting the awesome 69 Charger.
I still need to put another layer of gold on the big "j", & touch up some holidays
Carved "retro " sign
- T.R.MacMunn
- Vectric Wizard
- Posts: 318
- Joined: Sun Jan 01, 2012 2:30 pm
- Model of CNC Machine: CAMaster MC4836
- Location: Mountain Grove, Ontario, Canada
- Contact:
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Carved "retro " sign
Wow!...As usual, "Master" signmaker at work, beautiful!
If you don't mind me asking?
Are the 3d components applique? including the smaller text? In pocket? surface mounted or just machined on blank?
The texture sure adds a nice touch...
Even the shadow looks thicker than the blanks border....... great effect!
Thanks,
Glenn
If you don't mind me asking?
Are the 3d components applique? including the smaller text? In pocket? surface mounted or just machined on blank?
The texture sure adds a nice touch...
Even the shadow looks thicker than the blanks border....... great effect!
Thanks,
Glenn
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Carved "retro " sign
Beautiful work, Roger. Makes me want to make a stop at the pit stop...
Angie
Angie
Re: Carved "retro " sign
Wow, that is a really cool sign, is the texture behind the letters just lines carved with a v-bit. What paint did you use for the chrome-letters?
Christer
http://www.kyltti.fi
https://www.etsy.com/shop/SignBrother?r ... _shop_menu
Christer
http://www.kyltti.fi
https://www.etsy.com/shop/SignBrother?r ... _shop_menu
- T.R.MacMunn
- Vectric Wizard
- Posts: 318
- Joined: Sun Jan 01, 2012 2:30 pm
- Model of CNC Machine: CAMaster MC4836
- Location: Mountain Grove, Ontario, Canada
- Contact:
Re: Carved "retro " sign
Glenn .. the stars, the J, & the frame around the charger are appliques. Everything else is just;left from the pocket toolpath...
Thanks Angie ( the food there is AWESOME)
Crister .... you're almost correct. It's done with a .125" tapered ballnose with a 99% stepover. 1st path at 45*angle, then another toolpath the same depth at -45*. And, that's not paint ... it's 19 karat caplan gold
Thanks Angie ( the food there is AWESOME)
Crister .... you're almost correct. It's done with a .125" tapered ballnose with a 99% stepover. 1st path at 45*angle, then another toolpath the same depth at -45*. And, that's not paint ... it's 19 karat caplan gold
- customquint
- Vectric Craftsman
- Posts: 240
- Joined: Tue Jan 25, 2011 4:18 am
- Model of CNC Machine: AXYZ
- Location: Piqua, OH
- Contact: