3 Layer Owl Carving
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 3 Layer Owl Carving
Putzing
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: 3 Layer Owl Carving
Is PUTZING the same as mucking around?
I may have learned a new word
Cheers
Wolffie
I may have learned a new word
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 3 Layer Owl Carving
verb
verb: putz; 3rd person present: putzes; past tense: putzed; past participle: putzed; gerund or present participle: putzing
1.
engage in inconsequential or unproductive activity.
"too much putzing around up there would ruin them"
verb: putz; 3rd person present: putzes; past tense: putzed; past participle: putzed; gerund or present participle: putzing
1.
engage in inconsequential or unproductive activity.
"too much putzing around up there would ruin them"
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: 3 Layer Owl Carving
Yep
Same as mucking around in Aussie speek
Cheers
Wolffie
Same as mucking around in Aussie speek
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
-
- Vectric Craftsman
- Posts: 107
- Joined: Fri Mar 15, 2013 9:15 pm
- Model of CNC Machine: Heiz S-1000
Re: 3 Layer Owl Carving
Hi,
Does anyone know where we can legally buy the owl file?
thanks
Dave
Does anyone know where we can legally buy the owl file?
thanks
Dave
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: 3 Layer Owl Carving
I never heard back from the guy so we can only presume that he doesn't know who the copyright owner is or he is not willing to tell us
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
-
- Vectric Craftsman
- Posts: 107
- Joined: Fri Mar 15, 2013 9:15 pm
- Model of CNC Machine: Heiz S-1000
Re: 3 Layer Owl Carving
Hi
OK
Thanks
Dave
OK
Thanks
Dave
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 3 Layer Owl Carving
Wolffie, Turns out the guy that runs our second machine bought the same file from the same guy in July! (he likes 3D much more than me)
You'd think somebody would have made him yank it from E-bay by now--James B doesn't know, likewise this forum and Shopbots.
I haven't found it anywhere else, and have been searching on and off.
Think we're safe until someone mentions it, and then we'll buy from him in good faith(if he can prove provenance)
STILL my favorite file to Putz with because of the detail in the bark
Enjoy the holidays all!!
Still wish I could paint worth a darn.
scott
You'd think somebody would have made him yank it from E-bay by now--James B doesn't know, likewise this forum and Shopbots.
I haven't found it anywhere else, and have been searching on and off.
Think we're safe until someone mentions it, and then we'll buy from him in good faith(if he can prove provenance)
STILL my favorite file to Putz with because of the detail in the bark
Enjoy the holidays all!!
Still wish I could paint worth a darn.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Craftsman
- Posts: 128
- Joined: Tue Apr 24, 2012 7:01 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Jacksonville. Florida
Re: 3 Layer Owl Carving
a couple of years ago I think on cnczone there was a guy posting renderings like the yellow 164.png ( yellow). He was in either russia or the uk , don't remember.
I can not find out where the original image came from, all leads came to a end with no information.
I found the original picture at
http://freehdw.com/wallpaper/owl-120466.html
and
[urlhttp://www.forwallpaper.com/wallpaper/bird-the ... 45066.html][/url]
and a slightly different view
http://gde-fon.com/download/Owl_tree_ho ... 7/1440x900
the 3D model is flipped horizontally from the original picture
I can not find out where the original image came from, all leads came to a end with no information.
I found the original picture at
http://freehdw.com/wallpaper/owl-120466.html
and
[urlhttp://www.forwallpaper.com/wallpaper/bird-the ... 45066.html][/url]
and a slightly different view
http://gde-fon.com/download/Owl_tree_ho ... 7/1440x900
the 3D model is flipped horizontally from the original picture
Dana Decker
Aspire 8 something
CaMaster Stinger I
Aspire 8 something
CaMaster Stinger I
-
- Vectric Apprentice
- Posts: 68
- Joined: Wed Jul 06, 2011 5:17 am
- Model of CNC Machine: Probotix Meteor
Re: 3 Layer Owl Carving
That is AWESOME! I saw mention of the model being purchased somewhere but don't see a link.. where did you get it from?
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 3 Layer Owl Carving
Thanks so much for the info and links Dana!!
Great pictures on that wallpaper site!
scott
Great pictures on that wallpaper site!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Craftsman
- Posts: 245
- Joined: Fri Jan 18, 2013 8:47 am
- Model of CNC Machine: Shark Pro HD and CNCrouterparts 4896
- Location: Willow, Alaska
- Contact:
Re: 3 Layer Owl Carving
well done. I have worked with Tiling, but not layers. very nice.