Brim

This is the place to post images of work produced using Aspire
Post Reply
Leonard
Posts: 2
Joined: Thu Oct 23, 2014 12:08 am
Model of CNC Machine: MechMate Hybrid

Brim

Post by Leonard »

Here is a Brim I ran in 3/4" thick red oak.Need to work on the eye a little more thou.Designed most of the model in aspire.
Size is 5" x 8" Thanks
Attachments
Brim
Brim
Brim 2
Brim 2

pops1964
Vectric Wizard
Posts: 322
Joined: Sun Jun 22, 2014 11:09 pm
Model of CNC Machine: shopbot buddy bt 32
Location: Michigan USA

Re: Brim

Post by pops1964 »

Nice design , you may want to try a different wood than oak for 3-d carving. pop's
POPS1964
SHOPBOT Buddy BT-32

Leonard
Posts: 2
Joined: Thu Oct 23, 2014 12:08 am
Model of CNC Machine: MechMate Hybrid

Re: Brim

Post by Leonard »

Yeah I know , that is about all I can find for now, I will see if I can find some Maple
It would show up a little more on maple I think or maybe just some MDF for testing the
model out.

J Paszkiewicz
Posts: 22
Joined: Tue Jan 15, 2013 12:58 am
Model of CNC Machine: shopbot 48x96

Re: Brim

Post by J Paszkiewicz »

nice design!

LES MUELLER
Posts: 6
Joined: Sun Jul 19, 2009 3:37 am
Model of CNC Machine: Camaster X3
Location: MYRTLE BEACH S.C.

Re: Brim

Post by LES MUELLER »

Does anyone have a 3D file for a flounder. I have searched everywhere.

User avatar
scotttarnor
Vectric Wizard
Posts: 941
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Brim

Post by scotttarnor »

LES MUELLER wrote:
Sat Jul 24, 2021 3:39 am
Does anyone have a 3D file for a flounder. I have searched everywhere.
Found some here, never used this site before I was just searching.

https://www.turbosquid.com/Search/3D-Models/flounder
Scott T

@scottscnc

Post Reply