Page 1 of 1

Some Hive Equipment

Posted: Wed Jun 11, 2014 12:15 am
by jeb2cav
A set of 3 'memorial hives' made for a beekeeping family. The models are a combination of hand created using Aspire from scratch, purchased, and things I've scanned. Yes, there will be honey bees living in these soon...

Re: Some Hive Equipment

Posted: Wed Jun 11, 2014 12:34 am
by zeeway
Quite a design and beautiful execution. Will be the some of the sweetest beehives ever...

Angie

Re: Some Hive Equipment

Posted: Wed Jun 11, 2014 1:46 am
by glenninvb
Agree with Angie, that is some outstanding work!

The neighbor's bees may be a little envious though :P
Kidding aside,
Very nice memorial, I'm sure the bee keepers family will cherish them.

Re: Some Hive Equipment

Posted: Wed Jun 11, 2014 3:00 pm
by sailfl
Thank you for sharing your work. The family must love them.

Re: Some Hive Equipment

Posted: Wed Jun 11, 2014 3:12 pm
by WoodEraser
Joe

Nice work !
You've got the honeycomb and bees scene down to a science.
Thanks for posting.

Re: Some Hive Equipment

Posted: Thu Jun 12, 2014 1:01 pm
by mikeacg
All I can say is "WOW!" I have a friend who has bees and I'm almost afraid to show him these pictures... He'll want something like that for sure!
Thanks for sharing!

Mike :D

Re: Some Hive Equipment

Posted: Fri Jun 13, 2014 3:07 am
by SawdustandSmoke
That is very impressive I hope to learn how to make finger joints some day. Can you tell me where the bee hive model came from? that is neat.

I made one of these for a friend of my a while back https://www.youtube.com/watch?v=d1s28Oyxd-Q it allows you the bees to put honey in mason jars and when finished you cap them and sell them, pretty clever.

Re: Some Hive Equipment

Posted: Fri Jun 13, 2014 1:19 pm
by jeb2cav
Hi David,

I created the honey comb model through a couple of steps. I actually scanned a sheet of comb using a probe. Several years ago my wife had made a candy mold by hand - carved some clay/plaster, then vacuum molded it. I scanned those 'bees' (3 different models). Then used Aspire's modeling tools to put it all together. I suspect you could use a picture of honey comb to create this as well - and I'm sure many other methods. In fact, when I first started with VCarve and then test drove Aspire trial version, the fact that I could create this particular design is what enabled me to convince the boss to move to Aspire! The design on the side of the top left hive body I did from 'scratch' using Aspire's modeling suite.

The finger joints I did on the table saw in this case. Over the years I've used home made rigs, and purchased rigs. Now that I'm in a position that requires a lot of these and repeatability - I've found that the Incra Box Jig is frankly one of the best investments I've made in a jig. Works on both the table saw and router table, and is the easiest, and most accurate jig for this kind and size of joint in my opinion. For smaller finger joints, I've found the R2R (Ready 2 Rout) to be the easiest and most accurate on the router table. Don't get me wrong, I had a lot of success with my homemade jig for smaller projects or batches - but couldn't get the repeatability I need now.

Thanks for sharing the mason jar idea. We may give that a whirl next year. Thanks to all for the kind comments as well!

Re: Some Hive Equipment

Posted: Thu Jun 19, 2014 1:15 pm
by subsea
These are really grand. Dig the copper roof

Re: Some Hive Equipment

Posted: Wed Mar 29, 2017 12:29 pm
by Growls
These are spectacular. I would love to know how you programmed the hand holds in the super sides?

Re: Some Hive Equipment

Posted: Wed Mar 29, 2017 7:49 pm
by highpockets
Outstanding workmanship! Elegant and creative design. I know the family must really cherish them.

Thanks for sharing.

Re: Some Hive Equipment

Posted: Thu Mar 30, 2017 6:28 pm
by galerdude
Just plain awesome! 8) 8) 8)