Davy Jones Locker
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Davy Jones Locker
Please bare with me I didn't have a lot of time for photography and I'm really not satisfied with the pics but I have to say the shadow box is over the top. The port holes of course set everything off and really make the thyme work. Yes the retiree name is "Davy Jones". How fitting is that? This will be gifted to a US Navy Diver of 20 years. All was finished in my shop including the laser engraving.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
-
- Vectric Wizard
- Posts: 415
- Joined: Wed Nov 19, 2008 7:28 pm
- Model of CNC Machine: EZ-Router
- Location: Bronkhorstspruit, South Africa
Re: Davy Jones Locker
Jim, Beautiful and detailed craftsmanship as always.
“Over the top”? Since it is a tribute to someone who served for 20 years; maybe it is allowed … but this time only.
Thanks for sharing.
Joz
“Over the top”? Since it is a tribute to someone who served for 20 years; maybe it is allowed … but this time only.
Thanks for sharing.
Joz
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Davy Jones Locker
Ya Joz,
"Over the Top" might be a little strong. I should let me appraisers decide that. As far as the content goes maybe I should of said something like, "Deep, Real Deep".
If I said all the modeling was done in house by me would it make a difference?
"Over the Top" might be a little strong. I should let me appraisers decide that. As far as the content goes maybe I should of said something like, "Deep, Real Deep".
If I said all the modeling was done in house by me would it make a difference?
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Davy Jones Locker
Wow! I have to agree this is over the top! Beautiful work, Jim!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Craftsman
- Posts: 101
- Joined: Tue Apr 16, 2013 1:06 am
- Model of CNC Machine: camaster stinger1 with recoil
- Location: Hamburg, New York
Re: Davy Jones Locker
Jim outstanding work as usual. It's not just over the top it's fathoms deep. And to the recipient a huge thank you for his service to this great country!!! Jim hope to see you again at Jims this year.
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Davy Jones Locker
Thanks very much guys. Fathoms Deep it is. Tom I really had a great time at McGrew's last year but I'm afraid me schedule will not allow for a trip this year. Your more than welcome to stop by here on your way down or on your way back.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Davy Jones Locker
Jim,
Pretty work as usual. I really like the Davy Jones theme.
Angie
Pretty work as usual. I really like the Davy Jones theme.
Angie
-
- Vectric Apprentice
- Posts: 89
- Joined: Tue Mar 25, 2014 9:45 am
- Model of CNC Machine: CaMaster Stinger 1
- Location: Canada, Quebec
Re: Davy Jones Locker
Hi,
This is awesome!
This must be his best gift.
Regards
Claude
This is awesome!
This must be his best gift.
Regards
Claude
-
- Posts: 9
- Joined: Fri Sep 17, 2010 2:54 pm
- Model of CNC Machine: Morbedelli
- Location: Benicia Ca
- Contact:
Re: Davy Jones Locker
As an ex Navy diver, I have to say I a am very impressed. Very lucky guy who is receiving this. Great work!!!
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Davy Jones Locker
Thanks guys, This was a fun project. I'm just afraid that every one will want me to cut portholes in their shadowboxes now.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
-
- Vectric Apprentice
- Posts: 89
- Joined: Tue Mar 25, 2014 9:45 am
- Model of CNC Machine: CaMaster Stinger 1
- Location: Canada, Quebec
Re: Davy Jones Locker
I want holes in my boat! lol
- bill_w
- Vectric Wizard
- Posts: 435
- Joined: Wed Sep 08, 2010 12:19 pm
- Model of CNC Machine: PRSalpha BT48
- Location: Milwaukee,WI
Re: Davy Jones Locker
Jim,
Really nice work, I like it.
Really nice work, I like it.
Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: Davy Jones Locker
He will be one proud veteran. From one Navy veteran to another (and all veterans from every country), thanks for serving. Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Davy Jones Locker
Thanks for the comments everyone. Dave came in and thanked me today. He was most certainly pleased.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- gordread
- Vectric Wizard
- Posts: 382
- Joined: Sun Jul 08, 2012 3:29 am
- Model of CNC Machine: CNC Professor HDX
- Location: Onoway, Alberta
- Contact:
Re: Davy Jones Locker
That is tremendous work. Wow.