ceiling design converted to a 3D file format

This is the place to post images of work produced using Aspire
Post Reply
stankern
Vectric Wizard
Posts: 526
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

ceiling design converted to a 3D file format

Post by stankern »

found a ceiling design 30 foot diameter very detailed converted it from some difficult
cad format to a *.stl file and sized it to a smalled size
and cut it out .
Did loose a lot of the detail but still is quite interesting




used 2 1/4 end mills one roughing flat 17 % stepover 80in/min feed 16K speed ,the round
bottom one 8% stepover 16K 100 in/min took 47 min total
not counting the steptime of 13 min
Attachments
ceiling2.jpg
ceiling3.jpg
123.jpg

DarrenS
Posts: 35
Joined: Tue Jul 10, 2012 1:58 am
Model of CNC Machine: Mechmate #101

Re: ceiling design converted to a 3D file format

Post by DarrenS »

That is very cool. I'd like to replicate an old tin ceiling pattern for the bar I'm building in my basement.

Post Reply