Keep watching for more toys. The next series will be Model T and Model TT trucks. The difference is a 25" longer wheel base, 100" vs 125". The first will be a dump truck TT series.
Dale
Files do not contain passenger side fenders (you can flip them and create your own tool paths)
Files do not contain truck beds.
More toy cars
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: More toy cars
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: More toy cars
Here are a couple of spoke wheels similar to the model T. I haven't cut them yet to see if the 1/8" 10-spokes will hold up. I will probably them from red maple first. They will measure 2.4" diameter. The rounded tire part will be cut with a Magnate rope pen bit. Everything else will be cut with a 3/16" end mill except the 10-spoke holes to be cut with a 1/8" end mill. Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
- dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: More toy cars
Folks have been asking for the truck body files that go with the dump bed and flat bed
This post contains the files for the trucks that go with the beds posted in
http://forum.vectric.com/viewtopic.php?f=29&t=19405
dh
This post contains the files for the trucks that go with the beds posted in
http://forum.vectric.com/viewtopic.php?f=29&t=19405
dh
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale