Last Supper Box

This is the place to post images of work produced using Aspire
Post Reply
Timvmax
Vectric Wizard
Posts: 378
Joined: Tue Sep 08, 2009 3:41 pm
Location: UK

Re: Last Supper Box

Post by Timvmax »

Mark, don't know if you realise it, you may be learning but you're teaching us :-)
Top
User avatar
Nice Carvings
Vectric Craftsman
Posts: 189
Joined: Thu Oct 16, 2008 5:46 pm
Model of CNC Machine: Hytek Tools Sign Master HT4896
Location: Central Minnesota
Contact:
Contact Nice Carvings

Re: Last Supper Box

Post by Nice Carvings »

Really nice work, Mark :!:
Top
Rick O.
Vectric Craftsman
Posts: 250
Joined: Mon Jul 18, 2011 7:54 pm
Model of CNC Machine: CNC router
Location: Houston, Texas

Re: Last Supper Box

Post by Rick O. »

Beautiful & inspiring work! Clearly, lots of thought went into the design and execution, as well as a a whole bunch of detail work. Thanks for posting it for us to admire (& envy!) :)
RickO
Top
User avatar
glenn
Vectric Wizard
Posts: 582
Joined: Wed Jul 02, 2008 11:23 pm
Model of CNC Machine: home brew 40x20
Location: McArthur, Ohio U.S.A.

Re: Last Supper Box

Post by glenn »

Mark,
Beautiful!
Thanks,Glenn
Top
Vin0bim
Posts: 1
Joined: Tue Sep 03, 2013 11:21 pm
Model of CNC Machine: DIY

Re: Last Supper Box

Post by Vin0bim »

MarkJohnston wrote:Walnut carves really nice, at least for me. It's not the least expensive wood but not the most expensive either. I also like Bloodwood, it carves nicely to but it can chip a little as well.

Jim-I think in the time they would probably been sitting on the floor and in a circle facing each other but it's hard to paint a picture like that and get everyone in it. :lol:

Mark
They all wanted to be in the picture
Top
highway
Vectric Apprentice
Posts: 55
Joined: Sun Jul 25, 2010 3:04 pm
Model of CNC Machine: legacy artie 56
Location: Knoxville Tennessee

Re: Last Supper Box

Post by highway »

Mark your work is wonderful. I enjoyed seeing it

highway
legacy arty 58, vcarve pro, cut 3d, photo vcarve, 3d machinist, aspire,Turbocad 18,coreldraw x5
Top
MarkJohnston
Vectric Wizard
Posts: 823
Joined: Tue Jun 01, 2010 4:51 pm
Model of CNC Machine: CAMaster MC4848
Location: Prescott AZ

Re: Last Supper Box

Post by MarkJohnston »

Thank you Highway. I enjoy doing things like this, it's really a form on relaxation and a whole lot better than setting in front of a TV.

Mark
Top
tajohns
Vectric Craftsman
Posts: 137
Joined: Thu May 22, 2008 2:41 am
Model of CNC Machine: Home built + Jtech 7watt Laser
Location: Littleton, Colorado

Re: Last Supper Box

Post by tajohns »

Very Inspiring! I will need to try something walnut.
Thanks for posting.

Tom
Cheers,
Tom
Top
User avatar
GripUs
Vectric Wizard
Posts: 806
Joined: Thu Jan 18, 2007 2:07 pm
Location: San Angelo, Texas
Contact:
Contact GripUs

Re: Last Supper Box

Post by GripUs »

It has been a couple of years since I was on the forum and I must say I am seeing some beautiful work displayed here. I think your box is absolutely beautiful and quite innovative.

Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/
Top
MarkJohnston
Vectric Wizard
Posts: 823
Joined: Tue Jun 01, 2010 4:51 pm
Model of CNC Machine: CAMaster MC4848
Location: Prescott AZ

Re: Last Supper Box

Post by MarkJohnston »

Thanks again everyone. I was surprised this thread came up again after 4 years.

Mark
Top
Post Reply

Return to “Aspire - Gallery”