Painting by Debbie.
Pole is about 22 feet tall.
Flattened and fastened with small copper nails.
Two birdhouses have composition roofs, one plain brown and one Sierra White random pattern
Plus one on the BBQ Shed.
Birdhouses for Michael Tyler
-
dhellew2
- Vectric Wizard
- Posts: 1326
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Birdhouses for Michael Tyler
Now there are 23 on the pole
Painting by Debbie.
Pole is about 22 feet tall. The two gray ones at the top have metal roofs from Juice cans. Cut edge bent over to remove sharp edge.
Flattened and fastened with small copper nails.
Two birdhouses have composition roofs, one plain brown and one Sierra White random pattern
Plus one on the BBQ Shed.
Painting by Debbie.
Pole is about 22 feet tall. The two gray ones at the top have metal roofs from Juice cans. Cut edge bent over to remove sharp edge.
Flattened and fastened with small copper nails.
Two birdhouses have composition roofs, one plain brown and one Sierra White random pattern
Plus one on the BBQ Shed.
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
-
Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Birdhouses for Michael Tyler
Incredible
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
Re: Birdhouses for Michael Tyler
Cool!!
Phil
Phil