First Projects with Zank-style and Resin Multi Pour Inlays

[martindg]

Been wanting to try some inlay projects so jumped in with both feet. Completed both multi-pour resin and Zank-style inlay boards. Best outcomes shown below (won't show the couple that really didn't turn out well at all). Quite a learning process. Found that trying to match colors with the resin process can be pretty tricky as seen on the Army board where I used mica powders for the coloring but should have used a solid coloring agent such as acrylic paint. Also ran into big issues with really fine detail on the Zank-style where flattening through the drum sander kind of chewed up some if the finer details. But, slowly getting this figured out.

[pappybaynes]

Very nice!

[scotttarnor]

I love the design of the Bear, deer and fish ! Nice work !

[garylmast]

Looks like you got the process down. Nice job.

Gary

[jimandi5000]

Beautiful work.

[martindg]

I forget when I posted this that I wanted to give a shout out to Jim Lavin (jlavintx63). The Epoxy Volume Caluculator gadget that he wrote was a godsend for figuring out the epoxy process.

[Creation in Wood]

Beautiful work